DT Fan Posted February 3, 2023 Posted February 3, 2023 Like the title states, whet did you do with, or to your Red tractor today? There is a similar thread to this over on the Orange board, been fun for quite awhile now. Didn't actually do anything with or to them today I walked around and rubbed the 10, both 8's, and the 756 on the radiator support. Since the H hasn't made it to the farm it got left out. Also climbed up in the cab of the combine for a look. No evidence of mousel activity. Even smells good in there thanks to the dryer sheets! So what did you guys do with/to your favorites? 7 Quote
iowaboy1965 Posted February 3, 2023 Posted February 3, 2023 Nutn today. Not even rub the radiator. 🙂 2 7 Quote
nepoweshiekfarmalls Posted February 3, 2023 Posted February 3, 2023 Patted the Hydro 100 on the hood as I walked past it to the car this morning. 5 3 Quote
DT Fan Posted February 3, 2023 Author Posted February 3, 2023 3 minutes ago, nepoweshiekfarmalls said: Patted the Hydro 100 on the hood as I walked past it to the car this morning. 16 minutes ago, iowaboy1965 said: Nutn today. Not even rub the radiator. 🙂 That time of year I guess. 1 Quote
sandhiller Posted February 3, 2023 Posted February 3, 2023 Fed cows with the 1486 Pulled some bales out of the snow buried stack yard with the 656H so i could load them with the bale processor easier. Spent a good portion of yesterday pushing snow around with the 966 Had to drive past the SM with it's muffler up in the air flapping it's rain cap saying "pick me next", sorry not today. 🥺 Udder dan dat, just being lazy eatin dinner before I get to jump in my favorite Pete and go after another load of fuel . Life is good now that the sun is shining again. 🤠 9 Quote
856 Custom Posted February 3, 2023 Posted February 3, 2023 Well I'm not going to haul poop with the 966 with the IH cab, but this is a little newer than the 966 and it's a red tractor and what I'm doing today. 966 just too hard to get in and out of so many times loading the spreader 7 Quote
KY2674 Posted February 3, 2023 Posted February 3, 2023 Patting, rubbing and cussing this one 7 4 Quote
mike newman Posted February 3, 2023 Posted February 3, 2023 great reading the ''chronicles '' from the simple peasants of the rural American countryside..... as they go about the essentials of life with the beloved red tractors..... ..no one about to put a track back on a TD crawler , this morning ??? Mike 4 Quote
IKS Posted February 3, 2023 Posted February 3, 2023 Started it to make sure it was running to push and blow some snow after coffee. Yesterday it wouldn't start without a shot of starting fluid and in the horrible cold wind I decided not to do that. 4 Quote
1256pickett Posted February 3, 2023 Posted February 3, 2023 Nothing. Gave the cows extra hay yesterday so I didn’t have to today. My shop is unheated and uninsulated so I’m not even going out there to look at em. At least the cow barn has some body heat inside. 3 Quote
TeachersPet1066 Posted February 3, 2023 Posted February 3, 2023 Looked at pictures of them. Cold (for here) but maybe use Sunday to push some brush. Quote
bitty Posted February 3, 2023 Posted February 3, 2023 Hauled some with the MX 270 today. I also mounted the canopy to the tops on the 1066 getting painted . It is cold here compared to the other day Quote
db1486 Posted February 3, 2023 Posted February 3, 2023 Looked at them as I drove past going to work. I don't like working outside when it's cold so I treat them like me lol 1 Quote
John Rowehl Posted February 4, 2023 Posted February 4, 2023 Just looking through the parts book for the 826 to get myself more familiarized with all these pieces I’m taking off. 2 Quote
Drysleeves Posted February 4, 2023 Posted February 4, 2023 Fed cattle with the 186 ROPS like usual. 3 Quote
acem Posted February 4, 2023 Posted February 4, 2023 Fed hay with the 886. It's a mud pit... @mike newman if you were more careful running it you wouldn't have to put them back on! 😉 1 Quote
lorenzo Posted February 4, 2023 Posted February 4, 2023 Checked the battery tenders on them all. 4 degrees F here this morning. 1 Quote
Reichow7120 Posted February 4, 2023 Posted February 4, 2023 Nothing today. Did grind feed yesterday with the 105u. 7 Quote
Rusty_Farmer Posted February 4, 2023 Posted February 4, 2023 Removing tick in 806 reverse,ugh, 8 missing teeth and about 5# of brazing on shift parts.Glad it was cheap purchase! Quote
junkandcattle Posted February 4, 2023 Posted February 4, 2023 If off red counts unloaded some pipe for corral fencing. Well I should try to unload pipe. One bundle of 2 3/8 was too heavy for the 165MF and the loader relief valve cried like a cat. Neighbor came down with his skidsteer and picked it up, did a nosedive when he moved with it but with a little maneuvering, we got it done. 2 Quote
Wes806 Posted February 4, 2023 Posted February 4, 2023 Looked to see if the tires I fixed/replaced was still up on the 756. They still was so I guess I did at least one thing right. LOL 3 Quote
Farmall1066 Posted February 4, 2023 Posted February 4, 2023 Looked at 6 of them today. To cold for anything with them. 4 Quote
augercreek Posted February 4, 2023 Posted February 4, 2023 After doing a overhaul and clutch change had to wait for payday to complete the project on my 300U. Adding fluids this morning and hooking up hyd hoses for the power steering I've put on it. 3 Quote
Qc.Can.IH man Posted February 4, 2023 Posted February 4, 2023 I cleaned up a bit of snow with my first and one of my favourite 86 series tractors. It’s a Hydro 186 I also felt bad for all my tractors that have to spend the winter outside! I had so much hay last summer that I had to use one of my equipment storage buildings to store hay in. 23 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.