What ya working on?

[mrfred54]

6 hours ago, IHRedDrive said:

Bought a 300 at auction, just getting started on ir. M&W governor, first for us

Is wheel axle clamp missing on that left tire??? Very nice 300.

[bitty]

15 minutes ago, mrfred54 said:

Is wheel axle clamp missing on that left tire??? Very nice 300.

Kinda looks like it is....

[mikem]

Been pulling some parts off of a 1955 Super WD-9...

(Drawbar, fenders, floor pans, hour meter, wheel weights, maybe the hydraulic system.)

Been sitting outside for years with open exhaust, no sparkplugs, missing injectors.

Yep, it's stuck......So is every bolt I touched.

I'm gettin too old for this.

 

 

 

Mike

[Mr. Plow]

Laying out plans for a new workshop....meeting with builder this week.

 

[Absent Minded Farmer]

Cleaning in the basement, so I can expand the layout for the last time (I'm not dying, just ran out of basement). Also cleaning a B&H 535 16mm sound projector & still trying to source a drive roller for a Fairchild Seventy-07 movie player. If that comes to fruition, I'll be transferring some IH films to go with the Gehl films. Speaking of, it's about time the magic Gehl VHS bag gets reloaded. There are more people interested in those than anticipated. Can't keep the masses waiting.😆 And there's film to develop. Just got more C41 powders to make a dent in the color negative pile. Might clean up another camera or two & list them on eBay.

And the beat goes on....

Mike

[INTERNATIONAL 1466]

Really surprised more of them don't burn. We always take all the sheet metal off when they come in the shop and clean them up. Have had some really bad ones! Currently our shop is this.

[gonzo1066]

Just 2 ish projects right now.    A cummins into a 54 Ford F-350 and a 5088.  

[searcyfarms]

you guys have all the kool knowledge and abilities i feel like im just a tinkerer when i look at all these things, totally amazed!!!! some day i wanna grow up and be like you guys

[IHKeith]

Good topic!!! Lots of cool projects going on

My Dad’s 99 Ram 1500 with a 318 lost compression in a couple cylinders, I tore down a good running 98 318 I had, and replaced the gaskets and timing chain, and some fresh paint 

 

 

 

 

 

 

[mike newman]

4 hours ago, gonzo1066 said:

Just 2 ish projects right now.    A cummins into a 54 Ford F-350 and a 5088.  

..looks  interesting  !!  What model Cummins ??

Mike

[CIHTECH]

To name a few of them, rear main seal in JD 4455, speed trans in 7110 Magnum, injection pump on McCormick & a Bobcat loader, engine rebuild on CIH 695, and many other little walk-in jobs. Like rebuilding hydrostat pumps & motors, carbs an etc...

 

[mrfred54]

Got a few going on. 1086 clutch and waterpump, 1066 brakes, 5088 auxiliary valves repair leaks, 58 farmall cub front crankshaft seal,carburetor rebuild and governor, 886 range transmission shift linkage. 656 Pto rebuild. Just finished a F20 magneto

[IHRedDrive]

13 hours ago, bitty said:

Kinda looks like it is....

Clamp, brakes, ignition, carb work. Going to convert it to 12 volt, put a new harness on. Never seen straighter sheet metal on a 300 😀 

[gonzo1066]

11 hours ago, mike newman said:

..looks  interesting  !!  What model Cummins ??

Mike

The engine is a B series (5.9) Cummins.   The transmission is a Real Allison 643.  

[DT Fan]

Sorting! Been hauling stuff to the Salvation Army like crazy.

[iowaboy1965]

Just now, DT Fan said:

Sorting! Been hauling stuff to the Salvation Army like crazy.

Didn't know the salvation army took orange or red tractor parts 🤔 😃

[DT Fan]

1 minute ago, iowaboy1965 said:

Didn't know the salvation army took orange or red tractor parts 🤔 😃

Well, I don't know if they do. I'm keeping the good stuff!

Edit; probably have some certain wd parts redundant enough I could donate a few.

[Jacka]

Well my biggest chore,biggest thing I am doing ,working on is trying to keep up with INFLATION.

[Rusty_Farmer]

23 hours ago, INTERNATIONAL 1466 said:

Really surprised more of them don't burn. We always take all the sheet metal off when they come in the shop and clean them up. Have had some really bad ones! Currently our shop is this.

Hey... your in my shop?  Well close , looks like your about 4hrs. ahead of me. Doing the same thing to a 806 today. Have a 856 rear end sitting next to it for parts.

[IKS]

I have parted out a dead B 414 and now I am taking measurements, eye balliing pieces and tractor to build a 3pt hitch assembly foor my 2404

[Blee25]

I am giving my 49 Farmall Cub an engine refresh. It is getting new rings, rod bearings, valves, valve springs and valve guides, along with a new fan puppy assembly.

[Rusty_Farmer]

I have thoughts on some of these "56 series  electric fires. When the air filter gauge was add, an angle sleeve tilted the gauge for better sight. Bad was the tilt was now a catch for dirt and chaff,etc. Nearly every one I've been into was corroded or burnt at the connection. Something to look for as we service them this winter..

[gearheadmb]

I've been working on organizing hardware in the shop. I'm tired of the over packed storage containers and coffee cans full of mixed junk. So I built this.

I thought it would be a lot bigger than I needed. It is actually filling up a lot faster than I expected. 

[yellowrosefarm]

36 minutes ago, gearheadmb said:

I've been working on organizing hardware in the shop. I'm tired of the over packed storage containers and coffee cans full of mixed junk. So I built this.

I thought it would be a lot bigger than I needed. It is actually filling up a lot faster than I expected. 

That is a great solution for a common problem.

[IHRedDrive]

55 minutes ago, gearheadmb said:

I've been working on organizing hardware in the shop. I'm tired of the over packed storage containers and coffee cans full of mixed junk. So I built this.

I thought it would be a lot bigger than I needed. It is actually filling up a lot faster than I expected. 

Awesome job right there 👍🏻👍🏻