MTO Posted June 15, 2021 Posted June 15, 2021 3 hours ago, Sledgehammer said: Ducati!! ? Look out NASCAR And his little woman standing quietly by his side acknowledging her agreement. Lucky guy.... sniff. 1 1 1 Quote
bigequip Posted June 15, 2021 Posted June 15, 2021 57 minutes ago, Sledgehammer said: BittyBuilt Mfg “If it ain’t BittyBuilt it’s under built” That's for sure!! Probably have to start the Go Cart Mfg Co to support the kid on the track because this Racing is going to cost $$$$$$$. Every race car I had cost at least $1000 a weekend! Quote
Ihfan4life Posted June 15, 2021 Posted June 15, 2021 1 hour ago, MTO said: And his little woman standing quietly by his side acknowledging her agreement. Lucky guy.... sniff. And he doesn’t know how lucky he is ? 1 1 Quote
iowaboy1965 Posted June 16, 2021 Posted June 16, 2021 17 hours ago, MTO said: And his little woman standing quietly by his side acknowledging her agreement. Lucky guy.... sniff. He probably does the dishes and laundry when she takes trip.....? 3 Quote
Rawleigh99 Posted June 16, 2021 Posted June 16, 2021 Or "If it ain't Bitty Built it's S@#$!!" Although some of the stuff you built moves s@#$!! LOL 1 3 Quote
MTO Posted June 16, 2021 Posted June 16, 2021 1 hour ago, iowaboy1965 said: He probably does the dishes and laundry when she takes trip.....? har-dee-har-har! 1 2 Quote
m.c.farmerboy Posted June 16, 2021 Posted June 16, 2021 I built one for my boys with a 450 honda engine back in the 80's My wife told me to de-tune it before her boys got hurt or my manhood was going to be on the choppin block 2 4 Quote
m.c.farmerboy Posted June 16, 2021 Posted June 16, 2021 Just now, m.c.farmerboy said: I built one for my boys with a 450 honda engine back in the 80's My wife told me to de-tune it before her boys got hurt or my manhood was going to be on the choppin block it got de-tuned 1 3 Quote
m.c.farmerboy Posted June 16, 2021 Posted June 16, 2021 Just now, m.c.farmerboy said: it got de-tuned when she was around 1 5 Quote
bitty Posted June 16, 2021 Author Posted June 16, 2021 On 6/15/2021 at 12:42 PM, bitty said: Lol We are not done yet but he is already saying that we have to get a Ducati for the power source ..... I am hoping to get a little done tonight along with welding my 450 manifold My 450 manifold didn't have any success welding. I have changed plans to get by for now. We welded the top A arms enough to wait for them to cool down to install the plastic bushings. Quote
bitty Posted July 22, 2021 Author Posted July 22, 2021 Top pictures are a wrench I made to hold the yoke for torquing a magnum front pumpkin. Rockshaft almost broke 100% off the mower . I have to make a few sets of wheelie bars 1 Quote
bitty Posted July 28, 2021 Author Posted July 28, 2021 New cutting edge on the feed bucket. Probably around the 5th one . 7 Quote
bitty Posted July 30, 2021 Author Posted July 30, 2021 I worked at making a new exhaust pipe for the 450 tonight. I also altered an air cleaner to make it dry element but I found out that the M and 400 has a smaller pipe than the 450 so I will have to alter the 450 one . I am not sure why they uploaded out of order 4 Quote
bitty Posted July 30, 2021 Author Posted July 30, 2021 I added 2" to the top pipe and gutted the mesh before finding the difference. I don't really like welding really thin stuff like the air cleaner 7 Quote
Wes806 Posted July 30, 2021 Posted July 30, 2021 Nice work there. You sure have a nice shop ant the tools to do it. Always enjoy seeing your work. 2 1 Quote
Gearclash Posted July 30, 2021 Posted July 30, 2021 Welding really thin stuff is where either a 120V wire welder with flux core or a MIG with .025 wire is handy. Years ago I cut and rewelded Aaen pipes for a sled engine . . . talk about pop can thin . . . Quote
stronger800 Posted July 30, 2021 Posted July 30, 2021 3 minutes ago, Gearclash said: Welding really thin stuff is where either a 120V wire welder with flux core or a MIG with .025 wire is handy. Years ago I cut and rewelded Aaen pipes for a sled engine . . . talk about pop can thin . . . Modern aftermarket performance pipes....are even thinner. Aaen used good metal back in the day. Beauty bitty 1 Quote
bitty Posted December 28, 2021 Author Posted December 28, 2021 Fixing a set of tire chains up for it's last life cycle by the looks of them. There was a few cross bars that broke on the first side. I will see what this side looks like. This is WAY better than back before I had a mig welder and did this with the stick welder 2 Quote
hardtail Posted December 28, 2021 Posted December 28, 2021 That's a big tedious job, agree on better suited to mig, that must have decreased the hours Quote
bitty Posted January 12, 2022 Author Posted January 12, 2022 Gluing together a used Great Plains drill frame into a side dump cart for the chopper. Had all the components laying around but the wheel centers. It will have 30.5r32 Michelins we got on rims from a steiger 14 Quote
1586 Jeff Posted January 13, 2022 Posted January 13, 2022 That looks like an awfully stout frame for a side dump cart made out of seed drill boxes.... What are you going to use for the side dump box? Quote
bitty Posted January 13, 2022 Author Posted January 13, 2022 1 hour ago, 1586 Jeff said: That looks like an awfully stout frame for a side dump cart made out of seed drill boxes.... What are you going to use for the side dump box? We have a second Richardton 700 wagon we got a few years ago. This is our first one we made it to a cart style 15 years ago. 2 Quote
1586 Jeff Posted January 13, 2022 Posted January 13, 2022 21 minutes ago, bitty said: We have a second Richardton 700 wagon we got a few years ago. This is our first one we made it to a cart style 15 years ago. That makes sense. Around here there are more rotten boxes on decent running gear because they do not get cleaned out. Welding patches on rotten silage boxes can get time consuming and frustrating. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.