brahamfireman Posted May 23 Posted May 23 I had to drive 9 hours but it was worth it. International 706 gas. Per info I've found here they only made 299 and roughly 75 got converted to propane. So it's 1 of only 225 or so made. Tach says 2711 and I believe it's original, no wear on drawbar or pedals. Oil change numbers in cab show it only got 500 hours since the mid 90's. Oddly it's got 8 bolt front hubs. Cab and loader are definitely coming off. 22 Quote
Sledgehammer Posted May 23 Posted May 23 Yeah, don't see the gas standards or "I" series too often. Nice find. I've got one pic of a gas Standard and it's LP. 6 Quote
acem Posted May 23 Posted May 23 I like it. Had a friend with a 706D standard set up for rice. Big Rice and Canes in back. Single rib fronts. 3pt and PTO. Could have been a 'Rice Special' but didn't have the stickers. Definately was a rice tractor (was still in rice country). Good Find! Quote
dale560 Posted May 23 Posted May 23 5 hours ago, brahamfireman said: I had to drive 9 hours but it was worth it. International 706 gas. Per info I've found here they only made 299 and roughly 75 got converted to propane. So it's 1 of only 225 or so made. Tach says 2711 and I believe it's original, no wear on drawbar or pedals. Oil change numbers in cab show it only got 500 hours since the mid 90's. Oddly it's got 8 bolt front hubs. Cab and loader are definitely coming off. What state or province did you find it at? The gas tractors and propanes were popular in small areas but a lot seem to be in the Kansas area. Quote
Mark (EC,IN) Posted May 23 Posted May 23 A lot of potential there. What size are the rear meats on that old girl? Quote
mike newman Posted May 23 Posted May 23 4 hours ago, TN Hillbilly said: Cool! I like the cab and loader, though. ...don't get any idea's about desecrating your fine old 706 with that pig iron shown above..... Mike Quote
AmericanClassic Posted May 23 Posted May 23 Man, looks an awful lot like the one on my trailer... 3 Quote
lotsaIHCs Posted May 24 Posted May 24 I like those old full fender standards. The only one I ever ran with a loader was a Massey 55, and it didn't make an ideal loader tractor, but better than a shovel! Quote
nepoweshiekfarmalls Posted May 24 Posted May 24 I have spent some time on a 706 wheatland LP. 5 Quote
brahamfireman Posted May 24 Author Posted May 24 5 hours ago, dale560 said: What state or province did you find it at? The gas tractors and propanes were popular in small areas but a lot seem to be in the Kansas area. Just west of you out in Stanley. And he said he bought it 25 years ago south of Minot. Quote
brahamfireman Posted May 24 Author Posted May 24 5 hours ago, Mark (EC,IN) said: A lot of potential there. What size are the rear meats on that old girl? 23.1x30. Quote
dale560 Posted May 24 Posted May 24 8 hours ago, brahamfireman said: Just west of you out in Stanley. And he said he bought it 25 years ago south of Minot. There is or was a pocket of gas or propane tractors out in that area and north to the Canadian border. A lot of Oliver white and Minneapolis tractors out in that area years ago. Quote
Chester5732 Posted May 24 Posted May 24 10 hours ago, nepoweshiekfarmalls said: I have spent some time on a 706 wheatland LP. Did it hurt the tractor when you laid it on its side?😂 6 Quote
TroyDairy Posted May 24 Posted May 24 Looks clean. I cant imagine using something that little hrs! Imho....leave the cab on if you restore her. Cabs are unique now vs belly button open stations at shows. Wonder how it was as a loader? Do "I" standards turn very tight even? But yes, better then the alternative in 1967..a shovel Quote
brahamfireman Posted May 24 Author Posted May 24 48 minutes ago, TroyDairy said: Looks clean. I cant imagine using something that little hrs! Imho....leave the cab on if you restore her. Cabs are unique now vs belly button open stations at shows. Wonder how it was as a loader? Do "I" standards turn very tight even? But yes, better then the alternative in 1967..a shovel It's like pulling a parachute down the road, cabs on toy tractors is a big NO. Plus it's almost impossible to get into. 2 Quote
rustred Posted May 24 Posted May 24 30 minutes ago, brahamfireman said: It's like pulling a parachute down the road, cabs on toy tractors is a big NO. Plus it's almost impossible to get into. totally agree, it takes away from the beauty of the tractor. Quote
brahamfireman Posted May 24 Author Posted May 24 15 minutes ago, Big Bud guy said: Does it have a PTO and TA? Dual pto that looks to have never been used. No TA. 3 Quote
dale560 Posted May 24 Posted May 24 11 hours ago, brahamfireman said: Just west of you out in Stanley. And he said he bought it 25 years ago south of Minot. Was this your first time out to western nd? I have only been west to Stanley a couple times with the oil traffic out there it gets busy. Quote
Jacka Posted May 24 Posted May 24 Loader looks tough,built. I bet set of round bale forks it would move some hay in the winter. Those big hind tires would go through the mud. Quote
brewcrew Posted May 24 Posted May 24 I certainly don’t consider myself an expert on that vintage wheatland, but I believe the front tire options were 7.50-20 or 10.00-16, and both options were on 8 bolt hubs. It’s definitely unusual to see a gas that vintage! Quote
lotsaIHCs Posted May 24 Posted May 24 13 hours ago, brahamfireman said: Just west of you out in Stanley. And he said he bought it 25 years ago south of Minot. My roommate was from Stanley when I went to college in Williston. Back then it was part of the university system and was called UND-W. Today it is Williston State College. Quote
brahamfireman Posted May 24 Author Posted May 24 8 hours ago, dale560 said: Was this your first time out to western nd? I have only been west to Stanley a couple times with the oil traffic out there it gets busy. I have a high school friend who moved to Keif over 20 years ago so I've been east of Minot many times. I've only been to Williston once before it was an oil town. I love traveling through ND, very scenic compared to here. Quote
brahamfireman Posted May 24 Author Posted May 24 Got the loader and cab off today, new used muffler went on after I took the Pic. Tomorrow it gets pressure washed. 15 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.