510 plow going once....

[Jeff-C-IL]

Pulled my dads 510 semi-mount 5x trip-bottom plow out of the shed a couple months ago.   I's say its in fair shape...was used ~ 10 years ago, painted, shedded.  (always stored inside since new until now).  Could likely go plow anytime.

Don't know if there is any market for these anymore.   Certainly not where I live.  Am offering a chance if anybody wants to give me scrap price, they can pick it up....but I need it gone soon.   Going to the scrap yard if not.   Along with the old 24' rigid sectional IH rotary hoe.

[Tobaccoman]

Approximately where in Illinois are you located?

[DT Fan]

I'd come get them Jeff but it's too far to drive.

[Injpumped]

Jeff, I'd imagine leading up to Rantoul, you'll sell it, many people come just to plow, be a great place to buy one lmao!

[Jeff-C-IL]

T-man...AH, forgot to mention location....North Central IL, Just of I-39 about 20 minutes S of I-80.   Anybody interested can PM me.

DT - Hey I drove out about to there to pick up a 666.....only blew one trailer tire on the way home!

Inj....Unfortunately, I never get to Rantoul, as that's our busy season and gotta prepare for the FPS.   You can take it with you when you pick up the AC plow....😁

[Tobaccoman]

Dang, too far away for me unfortunately. 

[billonthefarm]

Got any pics?  510 plow works good but doesn’t have the clearance of a 710.

[Big Steve]

Jeff will give you a call about  plow and  hoe.   Big Steve

[Jeff-C-IL]

Couple requests for pics.   This plow would have likely been bought new by Dad in 69' or 70'.  I can remember plowing with 806 - & I was small enough to lay down on the little ledge behind the seat in the cab - so 2 ish?   Mom liked to tell the story that she killed the "new to them" 806 at the back of the field....and I popped up from behind the seat - "Mom, ya gotta push in the clutch!"

[Jeff-C-IL]

FYI -  plow has been snapped up already by a local friend on here.   I'm thankful since I really did not want to scrap it!

[1967806]

4 hours ago, Jeff-C-IL said:

FYI -  plow has been snapped up already by a local friend on here.   I'm thankful since I really did not want to scrap it!

I think I have a 510 4x18 at my shop I gave a 100 bucks for it and a 3 bottom from one of my sons landlords that was going to get scrapped. Its missing coulters on 2 and 3 moldboards. Had to put a new cylinder on it and a couple new tires.  Was hoping the 1466 would work on it fine with the RH wheel slid in for 30 inch rows? not sure I guess. 

[billonthefarm]

Glad it went to a good home!

[Jeff-C-IL]

14 hours ago, 1967806 said:

I think I have a 510 4x18 at my shop I gave a 100 bucks for it and a 3 bottom from one of my sons landlords that was going to get scrapped. Its missing coulters on 2 and 3 moldboards. Had to put a new cylinder on it and a couple new tires.  Was hoping the 1466 would work on it fine with the RH wheel slid in for 30 inch rows? not sure I guess. 

If you slide the draw bar over all the way to the right like in the 2nd picture above, it should work OK behind a tractor set for 30".   The last time we pulled the above was with a 1486 set for 30".     The first moldboard may not take quite a full slice, but its close. 

[766 Man]

On 12/16/2024 at 1:23 PM, Jeff-C-IL said:

FYI -  plow has been snapped up already by a local friend on here.   I'm thankful since I really did not want to scrap it!

  Glad to hear it.  I hate seeing any piece of farm equipment scrapped.