4410 Forklift

[Doc Egor]

I'm looking for the correct operator, parts and service manuals for a IH 4410 forklift.

I picked up a parts and operator's manuals from peaceful creek for a "4000" forklift, they are close but not correct.

I can get by, but would really like the correct manuals if possible...even if someone has the part numbers for the manuals it would be helpful.

 

Thanks!

[Binderdan]

Well JenSales shows some manuals for the 4410. Seems some share manual with a 340 AG tractor which I assume the 4410 chassis is based on.

https://www.jensales.com/categories/farmall-international/4410.html

I can see how the 4000 Forklift manual would make sense but I think that's newer machines than yours.

[mmi]

2 hours ago, Binderdan said:

Well JenSales shows some manuals for the 4410.

RUN forest RUn faster than the toner can dry,some places get $2-500 for those outback copies.

IIRC (ALL 300-340-06 ERA)were harlo/factory conversions.then 22xx modified conversions,then into more of Canadian built skid 25/35xx shuttle area.

44xx as a model should be '70>

https://www.redpowermagazine.com/forums/topic/156000-info-on-4500b-forklift/

moved on to JD platforms  of late more spec in house.

Whom ever has run harlo '11> didnt care about the heritage and looks as all info of it is scrubbed from the web

[Doc Egor]

8 hours ago, Binderdan said:

Well JenSales shows some manuals for the 4410. Seems some share manual with a 340 AG tractor which I assume the 4410 chassis is based on.

https://www.jensales.com/categories/farmall-international/4410.html

I can see how the 4000 Forklift manual would make sense but I think that's newer machines than yours.

Yup....I looked at the Jensales site and what they list appears to be a manual for a 340 as you said....and that is not correct.

This 4410 (as well as the 4414, 4420 that are the same chassis with just taller masts) appears to be built on a 404 chassis with the C-135 engine.

I'm not sure how the "4000" models fit into the picture - they are very similar in appearance and many of the features, but they appear to be just a bit more modern with a high/low transmission unit and gauges/switches on the pedestal with the steering wheel...this 4410 has a "06" style temp gauge/tellilite cluster in the original tractor dash (that is under the seat...lol). 

I had wanted a rough terrain lift for a long time (mostly to use as an assistance to working on old machinery) so I wasn't interested in spending a fortune on one.

I would have like to had a 4500, but I ran across this thing by accident and bought it for a song....the prior owner was not mechanically inclined and it barely ran.

After a quick tune up (mostly correcting the mixed up spark plug wires) it runs pretty good. I have no intentions of using it for seed boxes/bags or that type of thing so it will work just fine for my needs running around the yard.

 

 

[Dirt_Floor_Poor]

There appears to be reproduction parts catalysts for sale on eBay. I don’t know anything about them, just that they are listed. 

4410 Parts Catalog

This place has a service manual listed.

4410 Service manual

I don’t know anything about either one, so verify as much as you can if you buy anything.

 

 

 

[mmi]

As said Harlo cleaned all heritage ,but a 404 does share parts/similarity with 340/240,if ala chevy /cadillac

Additionally assume IH would have dumped this info into dresser.And Case not care

[IHRedRyan]

Few specs in the ad , C-135 engine is correct. 

[mmi]

From the Canadian ad (rare in USA) looks like 58 so it is early even for 340, to old for 460/504,next decade for Canadian/british skid mods.

As said Harlo refused to acknowledge/provide ANY info (any allied /mfg) prior to House label units.Girl 15 yrs back was not allowed to find out if tossed and/or scan> for $ fee.

That would have been a specked tractor(should have IH tag)then shipped to harlo for completion ,likely pRE- order by sales or dealer.

I will take two mortor boxs and rotator.

Could have had/saved 6 being sold as 340FL but at $3-8K they were too whooped to say harlo anywhere.All local ,Many 350 HU/HC are turning up original to witin 300 miles also

I would now defer back to Mike Becker/Canadian source for any period correct books. IIRC I have some poor IH/harlo PB

[mmi]

this is where I was going with model #s logic

4500

https://www.facebook.com/marketplace/item/619628807713712/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A499a8025-1938-4599-91d7-c233126b6233

IH bones harlo add on