A lot of power from 1066

[TheIntimidator1066]

I tuned my 1066 last year to pull and put big injectors, cranked up the fuel, 3lm turbo, upgraded all trans and TA. But this year they put up the speed limit to 12 mph and I’m done messing around. I’m going to build it through the roof looking for around 600 or 700 hp. I’m not looking to lose and making sure their isn’t a tractor that will beat it. So if 700hp isn’t enough I’ll go 1000. It’s an endless bank account so I’m open for whatever

[TheIntimidator1066]

I was just wanting what other people have done to get there

[shot_gun_red]

Call Hypermax they will make the power , and test that endless bank account!

[lorenzo]

Well damit anyway how bout some pictures of that monster. 

[Mudfly]

12 hours ago, TheIntimidator1066 said:

 It’s an endless bank account so I’m open for whatever

Please send some my way!  ?

Good luck with your endeavor.  The search for more horsepower is a great way to find the true meaning of endless! 

Just for asking what class do you want to run in?  Other on here are way more versed than I on this, but need to know the basic rules to point you in the correct direction.  

[farmall666]

GET THE MAXIUM CUBES YOU CAN GET OUT OF IT. THINK 640 OUT OF A 466

[twood1954]

IF you can run a bigger turbo, I would update to at least GT42, add water injection, and bigger pump.  1000 HP should be easy.  I am running 466 that deno over 1400 hp.

[Farmall1066]

You’ll be in the rear end next if you haven’t already!! Your going to want needle bearing differential!!! 

[twood1954]

I would start updating from back of the tractor:  Do rear end, then Atlas max transmission, crower clutch, cage, clutch blanket, tie bars and then do you engine.  You will have safe tractor to drive.  Good luck