pirlbeck Posted August 1 Posted August 1 These place show to have a used one. You will need to call them to know for sure. What is wrong with your old valve? 660-885-2287 cooktractorparts.com Cook Tractor Parts 207 N.W. 160 Clinton, MO 64735 800-543-2535 mikesequipment.com Mikes Equipment 9716 E. 82nd Ave. Buhler, KS 67522 800-992-5346 wellingtontractorparts.com Wellington Tractor Parts 3769 US Hwy 83 Wellington, TX 79095 This place MAY have a new one. 815-580-3247 machinerypartswarehouse.com Machinery Parts Warehouse 2702 May Rd. Peru, IL 61354 Quote
1480x3 Posted August 1 Author Posted August 1 After replacing o-rings & adaptor fittings, 3 service calls, we concluded that there must be a crack in the valve housing. With area clean & dry when a remote is activated oil appears, no spray, just slight seepage. Looses 2 gallon in a long day on swing tongue mower. Not bad but want it stopped if i can. Nothing available from CIH or FNH. Used on 27 models, mine is a 275 magnum. Quote
WisIHCFarmer Posted August 1 Posted August 1 All states ag parts supposedly has a used one. Just over $1600 Quote
1480x3 Posted August 1 Author Posted August 1 If they do they just got it in since thursday, will call them again . Thanks Quote
pirlbeck Posted August 1 Posted August 1 From past experience it seems like All States Ag Parts is not very good about keeping their online inventory up to date. If you just checked with them I think it is very unlikely that they have one now. Quote
HydroTek Posted August 1 Posted August 1 The valve functions properly ?? if you can locate the leak put a little chrome nickel on the leak ? Quote
1480x3 Posted August 2 Author Posted August 2 3 hours ago, HydroTek said: The valve functions properly ?? if you can locate the leak put a little chrome nickel on the leak ? Yes, every thing functions as it should Quote
1480x3 Posted August 4 Author Posted August 4 On 8/1/2026 at 9:57 AM, pirlbeck said: These place show to have a used one. You will need to call them to know for sure. What is wrong with your old valve? 660-885-2287 cooktractorparts.com Cook Tractor Parts 207 N.W. 160 Clinton, MO 64735 800-543-2535 mikesequipment.com Mikes Equipment 9716 E. 82nd Ave. Buhler, KS 67522 800-992-5346 wellingtontractorparts.com Wellington Tractor Parts 3769 US Hwy 83 Wellington, TX 79095 This place MAY have a new one. 815-580-3247 machinerypartswarehouse.com Machinery Parts Warehouse 2702 May Rd. Peru, IL 61354 cook tractor parts are shipping me one, thank you !! 1 Quote
RJBKSU Posted August 4 Posted August 4 Had this exact same problem on a 305. Leaking between the 2 largest fittings on rear of valve. This was 2 years ago and replaced with new valve just over 3000.00 from Case. Expensive leak. Quote
1480x3 Posted August 4 Author Posted August 4 11 hours ago, RJBKSU said: Had this exact same problem on a 305. Leaking between the 2 largest fittings on rear of valve. This was 2 years ago and replaced with new valve just over 3000.00 from Case. Expensive leak. Thats exactly where mine appears to be leaking. After we remove the wheels we will have a final look to confirm before removing the valve. Might end up raising the cab some also. Quote
1480x3 Posted August 5 Author Posted August 5 18 minutes ago, HydroTek said: Raise the front of the cab makes that job much easier Tech & i have figured we will, job will be in my shop during rainy time when cant make hay Quote
1480x3 Posted August 15 Author Posted August 15 Used valve on & no leaks !! Hairline crack between the 2 large openings on rear of valve could be seen after removal just like the post above. I had removed wheels & hubs since it had a slight wetness at axle seal so put a new one of those in also. Had decent access to valve without raising cab. It took Bob, CIH tech, around 6 hrs to change axle seal & valve including all new o-rings on the 11 lines & fittings plumbed to the valve, probly would have only took 4 hrs if i didnt help. I did all wheel/hub remove/install along with a deep clean/pressure wash a couple days before he came. 2 or 3 of the lines were challenging to remove but we got em off. Used a lot of the larger sizes of his crowfoot wrench set. 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.