Data center power 5288

[Delta88]

I have a 5288 that has lost the power to the data center. I have cleaned all grounds and it has power thru the 3 amp fuse that powers the key switchThe key switch has a 5 connector plug that sends power to the data center but the plug for it shows no power but 3 of the connectors do show power. 

The data center does work, i tried it in my other 5288.

Any ideas?

Tks

[HydroTek]

Check the fuse in the holder that is hanging on the wires beside of the block fuse holder

Check the 2 "hots" and the ground at the data center connector

that 3 amp fuse does not "power" the switch -- rather the switch powers the fuse

There is a data center diagram floating around this forum

[snoshoe]

[Mike56073]

I have had the pins back out on the round connector on the data center. Take a flashlight and double check to make sure they are all seated correctly

[Delta88]

Thanks!