need help ih 244

[mark60]

i need a rear wheel for a ih 244 tractor it's a 24in  6 lug 6 in between lugs with aprox 4 5/8'' center tire is a 9.5 x 24 any help would great

[yellowrosefarm]

As you may or may not know, that tractor was built by Mitsubishi.  It might be possible that other Mitsu tractors used the same wheel, opening up some other salvage possibilties.  Have you tried Wengers there in PA?  There is always ASAP also. https://www.tractorpartsasap.com/salvage-equipment/international-salvage/244-salvage.html

[mark60]

thank you for the suggestions i did call about 5 salvage yards without luck. i ended up ordering a new wheel made to fit  but i may call wengers in the future. yes i did know its made by mitsubishi its a good little tractor but real hard to get parts. maybe its time to look for something newer that i can get parts for 

[barkerwc4362]

I have a set of 244/245 front and rear wheels.  I also have a set of 254/255 rear wheels.  You're a long way from South Alabama though.

[CubNamedOscar]

On 6/19/2026 at 4:21 PM, mark60 said:

thank you for the suggestions i did call about 5 salvage yards without luck. i ended up ordering a new wheel made to fit  but i may call wengers in the future. yes i did know its made by mitsubishi its a good little tractor but real hard to get parts. maybe its time to look for something newer that i can get parts for 

nothing new thesedays. those grey market japan tractors now 30-45 yrs old can be insanely expensive or if not almost impossible to find parts for. Same for Satoh tractors. Can't get anything no more. The allis 5015 Hinomoto company went bankrupt. U can't even get engine parts or a rebuild kit. The 5020-5040s too. Licensed fiat/utb. stuff is around but really prcey. pricey