Kenny12 Posted February 14 Posted February 14 I have a 436 is the injector pump the same as a 414 Quote
IHC_1470 Posted February 14 Posted February 14 Yes and no. Would guess you are asking about the rotary head pump. They will bolt up but does not mean the calibrations will be the same. I can think of 3 different horsepower tractors that use a 414 and as many that use the 436. Some with electric shut off and some with mechanical. I would guess there are at least 6 different part number/calibration numbers for those pumps. Depends on how close you want to remain to OEM specs. 1 Quote
ny hay farmer Posted February 14 Posted February 14 injection pumps should be the same, probably have different fuel settings, and different tourqe curves, 1 Quote
Diesel Doctor Posted February 14 Posted February 14 10 hours ago, ny hay farmer said: injection pumps should be the same, probably have different fuel settings, and different tourqe curves, Most can be adjusted to fit the different tractors. But this is done on the test stand by setting the advance and the injection amounts in cc's/1,000 strokes of the pump. If you want it to run right, set the pump to the tractor. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.