Jump to content

Recommended Posts

Posted

I inadvertently shifted my 1466 to high range 4 while at low rpm’s. The tractor immediately died when I released the clutch. The tractor will turn over but won’t start. What could possibly be the problem? I’m absolutely stumped!

thanks for your suggestions!!!!

Posted
21 minutes ago, dirtyoily said:

I inadvertently shifted my 1466 to high range 4 while at low rpm’s. The tractor immediately died when I released the clutch. The tractor will turn over but won’t start. What could possibly be the problem? I’m absolutely stumped!

thanks for your suggestions!!!!

Check your fuel level, and move the throttle lever all the way over to "Fast". Try starting again.

If your batteries are low now from cranking it you might have to charge them.

If that doesn't do it please report back.

  • Like 1
Posted

Sounds like ya killed it hard enough it sucked air into the fuel system. Crack the bleeder on top of the filter housin and work the hand primer til ya get solid fuel no bubbles, then crack a line at an injector while somebody bumps the starter. Should fire right off.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...