nate Posted August 9 Posted August 9 Got a friends 1206 over, The three point will not raise unless you pull on a remote lever or push on one. The lift position seems to be correct. Any ideas. Quote
HydroTek Posted August 9 Posted August 9 Unloading valve is sticking Will the 3pt hold position ? 1 Quote
nate Posted August 9 Author Posted August 9 2 hours ago, HydroTek said: Unloading valve is sticking Will the 3pt hold position ? Yes, What causes sticking? Debris? Quote
HydroTek Posted August 10 Posted August 10 15 hours ago, nate said: Yes, What causes sticking? Debris? -- or rust from water in the oil You can get to the unloader valve in the RH seat support frame on the front -- may be a snapring or 3/4 drive square Quote
nate Posted August 12 Author Posted August 12 On 8/10/2026 at 9:40 AM, HydroTek said: -- or rust from water in the oil You can get to the unloader valve in the RH seat support frame on the front -- may be a snapring or 3/4 drive square Got it! I would post a pic but cant. The unloading valve unthreaded itself and no longer put pressure against the ball. Thanks for the pointers Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.