skunkworks Posted July 21 Posted July 21 The 125e is still kickin... I bypassed the transmission oil cooler - the radiator was leaking really really bad. Does anyone know of a source? The parts 125e also leaked... (I sent that one to a radiator shop and the guy could not save it..) Or know of a aftermarket radiator that is close? Quote
farmalldr Posted July 22 Posted July 22 Might try here. F P Smith in Calif. https://www.fpsmithparts.com/parts?gad_source=1&gad_campaignid=23960156760&gclid=CjwKCAjwsfzSBhB5EiwAOGyqSSx3qzsVQwzdaixFMA1rJ8pf1UbWYL2ZJQnNzzSeuszzWAx6rzMBMxoCi6oQAvD_BwE Quote
Binderdan Posted July 22 Posted July 22 A company called Radiator Supply House out of Oregon has a house brand of aluminum radiators and coolers called "Icebox". They have been featured on C&C Equipment's YouTube channel a few times for their dozer restorations like TD-20 and TD-25 radiators. They do show a radiator as well as an oil cooler for TD7C/E and 100C/E. Although the books show a different part number for the TD8C/E and 125C/E I am pretty certain they are interchangeable, but I haven't had two side by side to compare. International TD8E, TD7E 100C, 100E, Oil Cooler # 920022 Dresser 100C Crawler, 100E, 100G, TD7C Radiator # 930296 Although they aren't cheap, no radiators are anymore. Besides have you priced a re-core lately? 😶 Quote
skunkworks Posted July 22 Author Posted July 22 The #920022 looks identical (other than the picture is upside down...) I will take look - it is kind of funny as I have been watching c&c you tube videos over the last few days.. thanks sam Quote
skunkworks Posted July 25 Author Posted July 25 can someone help explain why there are 2 part numbers for the cooler? and each references the other? I guess I don't speak parts manual... Quote
skunkworks Posted July 25 Author Posted July 25 actually - the 661181c91 does show up on the #920022 page... so.. Quote
Binderdan Posted July 25 Posted July 25 I don't have a great answer for this but this seems to be common in the IH parts manual. I have seen many components of many different machines with two options that reference one another with no reason given as to the difference. Speculating, I would say its a manufacturer difference of the component, or one may be an older component design that fit a different machine but also worked in the early new machines then a new design came along. Giving options to parts still on the shelf. Just my theories. Quote
farmalldr Posted July 26 Posted July 26 I agree with @Binderdan. I think more than one vendor supplied a given part. Dennis I have no verification for this. Quote
jumpenjerry55 Posted July 30 Posted July 30 if you are still looking i have a international 125e with a few good parts machine is whole now. last time i used it the radiator and oil cooler were good. richard argonia kansas 316-734-6872 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.