zbeut Posted July 21 Posted July 21 I have a Case 970 from the 70s with a stuck engine. It has been sitting about 5 years. I have pulled injectors and filled cylinders with atf/acetone and also lots of pb blaster for about 3+ weeks now. I have removed the starter and pried on flywheel with a bar with no movement. I have also tried turning over with starter and a bar on the main crank at the same time. Anyone out there have experience and can lend a few tips? Quote
Powered by IH Posted July 24 Posted July 24 Hello, welcome to the Forum! You might want to post again on the "Technical IH Talk" board. This "Support" board is for website-related problems. You will also get more discussion on the Technical board. Don't worry about deleting your post, because only moderators can. Just make another new post. Good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.