wheatland1987

Thank you snowshoe. The spool is the cylinder inside the hydraulic valve?

Ok wow beyond my mechanical vocabulary. I see its quite a small orifice size. Im going to take it off and see if i can rebuild it or someone can

Hi there I have a 600 that the power steering only works if I hold one of the remotes on

Yes its factory steering. I haven't tried holding a remote on and steering. I will and I will get back to you.

Hello I've got a 600 that lost its power steering. It worked before and my hydraulic pump is good since I have the use of both my remotes. Thanks, Travis

Yes I got it out . My input shaft was seized in there. It was a tight fit but I got it out

Alrite thanks for your help. I have a owner's mAnual reprint coming

In Mendham Saskatchewan . Do you have a picture of you r 600? Where you at ?

The input shaft is stuck. But yes it all comes out in one piece. It can be done without separating

Hello everyone Im working on another 600 i purchased awhile ago. It needs a clutch. I cant seem to get the transmission flange to come out. Its loose but it won't clear . Anyone else have this problem?

Yep I got it . Thank you

Hey thanks for all your help again. Yes I plan on getting a reprint manual. Im in Canada so I had 5w40 oil in it to get running during the winter time. I also work out of a garage that has wood for heat. I dont plan on running it in the winter so 15w40 rotella is what I'll put in, as thats what I run in all my more modern diesel engines . Thanks, Travis

I ended up taking the injection pump off again and had it rebuilt . Tractor runs excellent now

Hello, I recently got an international 600 running again, and I dont possess a manual. I looked online and it gives me mixed answers So my question is; first off should I run SAE 30 oil in it or 15w40 and how much do i put in . Im thinking its 11 quarts or (10.4 litres). Am I right ? Thank you for the help, Travis.

Im going to take off injection pump and take to a diesel injection place.