ohio farmer Posted September 10, 2016 Share Posted September 10, 2016 2 hours ago, tony in ca. said: I believe so Mark, I had a couple pictures of one and he had a idea and together come up with scheme. I think he wants to use the same scheme on covers & tailgate. He says going to use red & black on engine with plated bolts . Cermichrome Exhaust. BTW Mark, we are giving rear end little higher gear ratio so highway travel not so whinny. Tony That higher gear will be nice. Let her cruise a it more. Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 10, 2016 Author Share Posted September 10, 2016 3 hours ago, ohio farmer said: That higher gear will be nice. Let her cruise a it more. I hope so because these Binders get to 50 and they let you know .lol. Here is a pic of a nicely done engine imho . I showed it to Rob and he said he has few ideas roaming in his head. Quote Link to comment Share on other sites More sharing options...
lintonxy Posted September 10, 2016 Share Posted September 10, 2016 Love those rocker covers. Personally I would try the silver section around the letters in white - very 'Inter'. However the silver looks great and ties in with the intake manifold nicely. Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 10, 2016 Author Share Posted September 10, 2016 21 minutes ago, lintonxy said: Love those rocker covers. Personally I would try the silver section around the letters in white - very 'Inter'. However the silver looks great and ties in with the intake manifold nicely. Your right. Quote Link to comment Share on other sites More sharing options...
ohio farmer Posted September 11, 2016 Share Posted September 11, 2016 That engine paint job is very sharp. I' m anxious to see what Rob comes up with. Quote Link to comment Share on other sites More sharing options...
twostepn2001 Posted September 11, 2016 Share Posted September 11, 2016 10 hours ago, ohio farmer said: That engine paint job is very sharp. I' m anxious to see what Rob comes up with. X2 Quote Link to comment Share on other sites More sharing options...
AKwelder Posted September 12, 2016 Share Posted September 12, 2016 16 hours ago, twostepn2001 said: X2 X3 A true artist Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 17, 2016 Author Share Posted September 17, 2016 Little more progress on the binder. Cab is painted, Frame going together, We were able to find all NEW components for front end. Engine painted along with bell & tranny Tony Quote Link to comment Share on other sites More sharing options...
twostepn2001 Posted September 17, 2016 Share Posted September 17, 2016 Sure do like that red cab!!! I know this ain't the right time but I have a off the wall question....I'm guessing you'll put rubber floor mats in the truck. Will they be full coverage type or separate driver and passenger side mats? Like I said this is way ahead of time frame, but just curious......lol Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 17, 2016 Author Share Posted September 17, 2016 2 hours ago, twostepn2001 said: Sure do like that red cab!!! I know this ain't the right time but I have a off the wall question....I'm guessing you'll put rubber floor mats in the truck. Will they be full coverage type or separate driver and passenger side mats? Like I said this is way ahead of time frame, but just curious......lol I am to put carpet down then Rubber mats when using it for protection. Tony Quote Link to comment Share on other sites More sharing options...
Kevingweq Posted September 17, 2016 Share Posted September 17, 2016 58 minutes ago, tony in ca. said: I am to put carpet down then Rubber mats Tony , Are you going to use any of the "sound deadening" or insulation materials available in the aftermarket ? Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 17, 2016 Author Share Posted September 17, 2016 39 minutes ago, Kevingweq said: Tony , Are you going to use any of the "sound deadening" or insulation materials available in the aftermarket ? Yes , I hope to, have not had that conversation with Rob yet but I see he uses it on most of his jobs . Thanks for the reminder! I have waited so long for paint that Its hard to move on .lol. Tony Quote Link to comment Share on other sites More sharing options...
TroyDairy Posted September 18, 2016 Share Posted September 18, 2016 Some dynamat does wonders. Looks good.....was surprised to see body matched trans. Most are black or gray/silver. Iirc you were going to put a higher gear set in the diff so the ol IH will go 65 easily. Have you looked at maybe running a Gear Vendors overdrive unit? Pretty slick unit and appear quite reliable. Just thinking out loud and it would be nice for a cruise out to Pismo. Quote Link to comment Share on other sites More sharing options...
Kevingweq Posted September 19, 2016 Share Posted September 19, 2016 3 hours ago, TroyDairy said: Pretty slick unit and appear quite reliable Cats a%% gives you both under and over drives at flick of a switch , as for availability on IH ?? There is adapters available to go a few different directions ADAPTERS - International Scout Parts Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 19, 2016 Author Share Posted September 19, 2016 We talked about the overdrive . Rob checked on it came up with gear set. I'll find out more this week I hope. Thanks Guys, Tony Quote Link to comment Share on other sites More sharing options...
TroyDairy Posted September 20, 2016 Share Posted September 20, 2016 23 hours ago, tony in ca. said: We talked about the overdrive . Rob checked on it came up with gear set. I'll find out more this week I hope. Thanks Guys, Tony Hey just trying to spend your money the best way we see fit!! A higher ratio gear set will be adequate for sure. The trans gearing is pretty low if I remember from rides. Man it will look cool when done! What were you doing for wheels again? Steelies and chrome? 22" black ones? 13" wire spokes? Quote Link to comment Share on other sites More sharing options...
Sledgehammer Posted September 20, 2016 Share Posted September 20, 2016 14 hours ago, TroyDairy said: Hey just trying to spend your money the best way we see fit!! A higher ratio gear set will be adequate for sure. The trans gearing is pretty low if I remember from rides. Man it will look cool when done! What were you doing for wheels again? Steelies and chrome? 22" black ones? 13" wire spokes? That probably all depends on how much leeway he gives the paint shop guys Troy Quote Link to comment Share on other sites More sharing options...
BOBSIH856 Posted September 22, 2016 Share Posted September 22, 2016 On 9/20/2016 at 0:34 AM, TroyDairy said: Hey just trying to spend your money the best way we see fit!! A higher ratio gear set will be adequate for sure. The trans gearing is pretty low if I remember from rides. Man it will look cool when done! What were you doing for wheels again? Steelies and chrome? 22" black ones? 13" wire spokes? Daytons would look pretty bad@#$ on the truck! 20"? Quote Link to comment Share on other sites More sharing options...
M Diesel Posted September 22, 2016 Share Posted September 22, 2016 32 minutes ago, BOBSIH856 said: Daytons would look pretty bad@#$ on the truck! You are right about that! Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 29, 2016 Author Share Posted September 29, 2016 Started going back. 9/29/16 Tony Quote Link to comment Share on other sites More sharing options...
bitty Posted September 29, 2016 Share Posted September 29, 2016 Getting an intake with a blower polished and ready for installation? Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 29, 2016 Author Share Posted September 29, 2016 1 hour ago, bitty said: Getting an intake with a blower polished and ready for installation? Quote Link to comment Share on other sites More sharing options...
bitty Posted September 29, 2016 Share Posted September 29, 2016 16 minutes ago, tony in ca. said: Just saying that I have a blower from a 671 droptroit we parted out. I think it would be neat to see it used Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted September 30, 2016 Author Share Posted September 30, 2016 4 hours ago, bitty said: Just saying that I have a blower from a 671 droptroit we parted out. I think it would be neat to see it used That's getting to sophisticated for this little Binder & above my pay grade. lol. Thanks for the idea though. Tony Quote Link to comment Share on other sites More sharing options...
Tonyinca Posted October 11, 2016 Author Share Posted October 11, 2016 We found a used four barrel intake manifold for the 345. The one I had was a two barrel and seems most are two's. Had it CermiKote , Receiving Re- Chromed items. Guys are buffing doors in prep to hanging them. Tony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.