Jump to content
Sign in to follow this  
FarmallLover

Planning on getting Farmall A running again and custom building a plow operating system for it

Recommended Posts

I am deciding to get my "A" running again and after that, I am going to put my plow on her. Only problem is I don't have hydraulics so, I will have to fabricate a way to raise and lower the blade

Will post pictures as project gets underway, suggestions for plow system is greatly appreciated, thanks

Share this post


Link to post
Share on other sites

My A don't have hydraulics so I used a massy haires 6 volt lift motor. I removed the sprocket and made my own spool. I ran the plow frame back to the draw bar mount and attached to the caltavater in the front. I used a 6ft Myers plow on mine.

Share this post


Link to post
Share on other sites

My A don't have hydraulics so I used a massy haires 6 volt lift motor. I removed the sprocket and made my own spool. I ran the plow frame back to the draw bar mount and attached to the caltavater in the front. I used a 6ft Myers plow on mine.

Welcome aboard !!

Can you post some pictures Buzz??

Share this post


Link to post
Share on other sites

Can't wait to see the photos

Share this post


Link to post
Share on other sites

Awesome! Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...