Jump to content

Planning on getting Farmall A running again and custom building a plow operating system for it


Recommended Posts

I am deciding to get my "A" running again and after that, I am going to put my plow on her. Only problem is I don't have hydraulics so, I will have to fabricate a way to raise and lower the blade

Will post pictures as project gets underway, suggestions for plow system is greatly appreciated, thanks

Link to comment
Share on other sites

My A don't have hydraulics so I used a massy haires 6 volt lift motor. I removed the sprocket and made my own spool. I ran the plow frame back to the draw bar mount and attached to the caltavater in the front. I used a 6ft Myers plow on mine.

Link to comment
Share on other sites

My A don't have hydraulics so I used a massy haires 6 volt lift motor. I removed the sprocket and made my own spool. I ran the plow frame back to the draw bar mount and attached to the caltavater in the front. I used a 6ft Myers plow on mine.

Welcome aboard !!

Can you post some pictures Buzz??

Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...