2388 grain tank sump

[IHC5488]

Who sells a good one and I'd good quality steel?  Gauge of steel probably makes a difference in prices......thanks . 

[756puller]

Ive always installed the case ih ones. But anymore I'd be a betting man saying they all come down the same line just a different sticker on them.

[IHC5488]

1 hour ago, 756puller said:

Ive always installed the case ih ones. But anymore I'd be a betting man saying they all come down the same line just a different sticker on them.

I sorta wondered that as well 

[756puller]

Don't quote me on it. I know the packing always did say made in USA but I'm sure they can forget the country of origin anymore and charge like ****

[acem]

There was a company that offers them made in different metals including stainless. 

Can't remember the name...

[acem]

Here's an upgraded one from CIH made by IHLE.

https://mycnhreman.com/collections/ihle-wear-parts/products/case-ih-bottom-boot-sump-fully-lined-192475c3r?variant=43282360303768

Looks like IHLE don't offer it for sale on its website anymore.

https://www.ihlefabrications.com

[jass1660]

If you want Ihle you have to get from CIH now. 

[IHC5488]

On 5/26/2025 at 4:25 PM, acem said:

There was a company that offers them made in different metals including stainless. 

Can't remember the name...

 

On 5/26/2025 at 12:24 PM, 756puller said:

Don't quote me on it. I know the packing always did say made in USA but I'm sure they can forget the country of origin anymore and charge like ****

What are the odds that sump comes out the bottom of the grain tank?

 

 

[756puller]

It will come out the bottom with a bit of prying and holding your tongue just right.

[acem]

Don't you have to completely dissemble the unloaded system to replace it anyway?

[IHC5488]

3 hours ago, 756puller said:

It will come out the bottom with a bit of prying and holding your tongue just right.

 

24 minutes ago, acem said:

Don't you have to completely dissemble the unloaded system to replace it anyway?

I have got sump loose. Vertical auger,  gear box, and bottom crock are on the ground.   I don't want to take all the hydraulic lines off or aprt to remove the sump out the bottom.  I can suspend the unloading auger and elbow from the shop ceiling if need be, but was trying to avoid that and not to remove the vertical tube as well....   just the darn hydraulic lines on the bottom are in the way.....and maybe the belt guard around the unloader drive.

[756puller]

What model combine?

 

[IHC5488]

1 hour ago, 756puller said:

What model combine?

 

2388

[756puller]

Should be able to take the hydraulic lines loose from the two sets of holders and bend them out of the way a bit and get the sp.out the bottom.

[hardknocks]

what about the FARM TUFF® Elevator Sump Rebuild Kit for Case IH® Combine, 73399582R.  that any count