Long Farms Posted June 7, 2021 Share Posted June 7, 2021 Bought another 826. Needs some attention but decent and honest 826. Hrs seem right for what tach shows. Im looking for an 826 grille and screen and another original IH stamped muffler for it. Part # 530 888R1-R4 18.4x34 clamp-on rear wheels 7.50-16 6 bolt front wheels Tach shows 4760hrs Mech seat Factory open station TA 2 Hyd Link to comment Share on other sites More sharing options...
Long Farms Posted June 7, 2021 Author Share Posted June 7, 2021 Link to comment Share on other sites More sharing options...
Cool1566 Posted June 7, 2021 Share Posted June 7, 2021 Looks like the rear tires could possibly be original? Might be far fetched but they look like an old tread pattern. Link to comment Share on other sites More sharing options...
Farmall1066 Posted June 7, 2021 Share Posted June 7, 2021 Decent looking 826! Keeper, or seller? Link to comment Share on other sites More sharing options...
Long Farms Posted June 7, 2021 Author Share Posted June 7, 2021 Pulling dozer blade off my 856 and putting it back the way it was. This 826 will be on dozer duty from now on. Link to comment Share on other sites More sharing options...
Long Farms Posted June 7, 2021 Author Share Posted June 7, 2021 Changed the hyd oil, hyd filter, fuel filters, installed 2 piece hyd filter cover, cleaned rats nest in air filter housing, new outter air filter, removed hood and one huge rats nest. Getting rear wheels ready to hand weights. Wire harness is just a crumbling mess. Ordered a set of 9.5L15 front tires for it. Link to comment Share on other sites More sharing options...
Farmall1066 Posted June 8, 2021 Share Posted June 8, 2021 That hydraulic filter looks good!!??? Link to comment Share on other sites More sharing options...
Long Farms Posted June 8, 2021 Author Share Posted June 8, 2021 Fresh engine oil & filter, new 9.5L15 tires, adjusted front wheel bearings, had to drill and tap 2 broken weight bracket bolts. Ordered new wire harnesses from Porch Electric. Getting ready to get stripped and scrubbed. Link to comment Share on other sites More sharing options...
Farmall1066 Posted June 8, 2021 Share Posted June 8, 2021 Doesn’t take you long to get right after them!! Link to comment Share on other sites More sharing options...
Long Farms Posted June 10, 2021 Author Share Posted June 10, 2021 Link to comment Share on other sites More sharing options...
Long Farms Posted June 11, 2021 Author Share Posted June 11, 2021 Link to comment Share on other sites More sharing options...
nepoweshiekfarmalls Posted June 11, 2021 Share Posted June 11, 2021 Amazing how much red paint is hiding under all that grease! Looking nice, Mr. Long. Link to comment Share on other sites More sharing options...
806Jordy Posted June 12, 2021 Share Posted June 12, 2021 Lots of progress in a short amount of time! Tractor is looking good!! Link to comment Share on other sites More sharing options...
Long Farms Posted June 13, 2021 Author Share Posted June 13, 2021 Link to comment Share on other sites More sharing options...
acem Posted June 15, 2021 Share Posted June 15, 2021 Looking good. Dale at dumas tractor salvage had an 826 grill not too long ago. Thx-Ace Link to comment Share on other sites More sharing options...
mrfred54 Posted June 15, 2021 Share Posted June 15, 2021 Wow? gonna be a GOOD LOOKER when your done with it Link to comment Share on other sites More sharing options...
Long Farms Posted June 19, 2021 Author Share Posted June 19, 2021 Alot of hassle for 3 orings. Can get alot of areas cleaned up and buttoned up though. Also pulled out the weak hitch pump. Link to comment Share on other sites More sharing options...
ArkLa 1086 Posted June 19, 2021 Share Posted June 19, 2021 Nice looking tractor. Love seeing pictures of your work. Link to comment Share on other sites More sharing options...
Farmall1066 Posted June 19, 2021 Share Posted June 19, 2021 3 hours ago, Long Farms said: Alot of hassle for 3 orings. Can get alot of areas cleaned up and buttoned up though. Also pulled out the weak hitch pump. You make things look so easy!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.