EDWARD886 Posted November 20, 2018 Share Posted November 20, 2018 Gents, i finally have my 466, going to tear her down and rebuild it.... any suggestions on how to go to "build power" and who to go to with questions. i have heard WIPEOUT is good all help is greatly appreciated Quote Link to comment Share on other sites More sharing options...
TractormanMike.mb Posted December 31, 2018 Share Posted December 31, 2018 How much power are you looking to squeeze out of it Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 1, 2019 Author Share Posted January 1, 2019 800 ish? Quote Link to comment Share on other sites More sharing options...
88power Posted January 1, 2019 Share Posted January 1, 2019 What are the rules in your class Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 1, 2019 Author Share Posted January 1, 2019 Oem block 3”x3” turbo a pump tie bars bellhousing blanket 18/4 38- 20.8 42 air shut off Quote Link to comment Share on other sites More sharing options...
twood19541 Posted January 1, 2019 Share Posted January 1, 2019 Can you run water injection? Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 1, 2019 Author Share Posted January 1, 2019 In pro farm yes not in hot stock.... and I don’t think I’m smart enough to run water... lol Quote Link to comment Share on other sites More sharing options...
Butch-Ky Posted January 1, 2019 Share Posted January 1, 2019 Better get you some more Ed-U -cation up front 1 Quote Link to comment Share on other sites More sharing options...
twood19541 Posted January 1, 2019 Share Posted January 1, 2019 Water is easy buy a Simpson's valve, and pump and plumb it in. I don't want to burst your bubble, but you will need a lot more than 800 HP to compete in Pro-farm class. 1200 HP is more realistic if you want to be in top half of the class around here. Find a builder that you trust and talk to him. Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 1, 2019 Author Share Posted January 1, 2019 Great man, not bursting my bubble.... I’ll take all the help/ constructive criticism I can get Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 1, 2019 Author Share Posted January 1, 2019 Great man, not bursting my bubble.... I’ll take all the help/ constructive criticism I can get, by the look of your tractor you’ve been doing it a while Quote Link to comment Share on other sites More sharing options...
twood19541 Posted January 1, 2019 Share Posted January 1, 2019 Ed, I don't want you to spend money on parts that are not the best and have to replace them with better parts. I hired one of the best pullers in pulling to build my motor and been very happy with how it runs. I am running north of 1200 HP. I would suggest getting custom pistons, re-ground cam, harden rods, and a very good 3X3 turbo. Spend your time, money correctly, and build it right the first time. It more fun running than wrenching on the tractor all the time. You can PM and me and I will let you know who built my engine. Good luck. Quote Link to comment Share on other sites More sharing options...
EDWARD886 Posted January 2, 2019 Author Share Posted January 2, 2019 Awesome man thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.