nepoweshiekfarmalls 0 Posted April 15, 2017 I have been collecting the pieces/parts for years to restore this one. With the 656 being the feature tractor at this years roundup, now was the time to get it done. Pulled it out in January, cleaned the fuel system and rebuilt the carburator. Drove it up to the shop. Pulled tinwork off and powerwashed off the first few greasy layers. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted April 15, 2017 Overhauled the engine, new clutch, TA. Had it on the the dyno, pto started slipping. Pulled it out and rebuilt it as well. Converted to the spin on oil filter for easier maintenance. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted April 15, 2017 Pulled off worn out seat suspension. Blasted parts and painted. I need to reassemble it, but the lawnmower needs spring tuneup! Share this post Link to post Share on other sites
Sledgehammer 9 Posted April 16, 2017 Sounds like you already have most of the bases covered. Looks like a winner. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted April 18, 2017 Final powerwash on Easter Sunday afternoon. Into the shop, final teardown for paint is next. Share this post Link to post Share on other sites
AKwelder 4 Posted April 19, 2017 That's looking good. if you already said I missed it, but does the tractor have any history for you? Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted April 21, 2017 I purchased it from a good friend. His dad purchased it new. He passed away unexpectedly a couple years ago. He would have enjoyed seeing it restored. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 3, 2017 Here are a few photos of my progress. Pto out for rebuild. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 3, 2017 Adding a second hydraulic valve and rear outlets. Repairing broken 3 point lever and installing new friction discs on the levers. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 3, 2017 Freeing up frozen 3 point arms. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 4, 2017 They actually turn now! Share this post Link to post Share on other sites
Sledgehammer 9 Posted May 4, 2017 7 hours ago, nepoweshiekfarmalls said: They actually turn now! Thats a big plus Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 4, 2017 1 hour ago, Sledgehammer said: Thats a big plus Never know when you might want to put a mower on it! Or a plow or a blade........ Share this post Link to post Share on other sites
tony in ca. 0 Posted May 4, 2017 You are working fast . Congratulations on Acquiring that Gem ! Looking forward to seeing it & you at Des Moines. Tony Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 4, 2017 1 hour ago, tony in ca. said: You are working fast . Congratulations on Acquiring that Gem ! Looking forward to seeing it & you at Des Moines. Tony I look forward to seeing you again, Tony. While you are here, you need to dine at The Latin King restaurant. You would enjoy the meal! The tractor is currently tore down and partially in primer. My photo posting is behind my progress in the shop. Share this post Link to post Share on other sites
new guy 6 Posted May 26, 2017 When you bring it to the show will you put your nickname from here on a sign so we know whose it is? I am guessing there will be more than a couple like it around the show and i would like to see your finished project in person. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted May 26, 2017 1 hour ago, new guy said: When you bring it to the show will you put your nickname from here on a sign so we know whose it is? I am guessing there will be more than a couple like it around the show and i would like to see your finished project in person. My name is Aaron Wade from Grinnell Iowa. My machines will have magnets on them with my name. I will try to put my poweshiek name on the paper Roundup signs as well. Cannot wait to see you all there! I will try to post update photos soon. Between work, Roundup responsibilities and my son's high school graduation my time on here has been limited. Share this post Link to post Share on other sites
new guy 6 Posted May 26, 2017 18 hours ago, nepoweshiekfarmalls said: My name is Aaron Wade from Grinnell Iowa. My machines will have magnets on them with my name. I will try to put my poweshiek name on the paper Roundup signs as well. Cannot wait to see you all there! I will try to post update photos soon. Between work, Roundup responsibilities and my son's high school graduation my time on here has been limited. Grinnell you say.....i will be over that way after 6pm tonight. If you happen to be in town and see a caseys gas truck...stop and say hi. South and west stores. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Preparing to change front and rear wheels, add wide front axle. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Parts ready for paint. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Swap to wide front. Install rear cast wheels. New axle seals. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Tires and rims! Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Masking for paint. Final wipe down. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Finally reached the primer stage. Share this post Link to post Share on other sites
nepoweshiekfarmalls 0 Posted June 24, 2017 Red paint at last! I was up an entire night painting this old girl. Share this post Link to post Share on other sites
