Search the Community
Showing results for tags '500'.
Found 1 result
Hello, It has been sometime since I posted, but I figured I would give an update on my project. It has been a long one, constantly delayed due to work, other projects and weather, rebuilding an engine in a open sided shed during the winter is not the most pleasant. loaded onto the trailer when I first got her Last August I pulled the engine on my 1966 IH 500, due to finding camshaft parts lying on the bottom of the oil pan. After pulling the engine I was able to order most parts from Fawcett.ca, including new pistons, camshaft, crank shaft and bearings etc. Then everything sat until a few months ago when I resumed disassembly of the engine Make shift sleeve puller I forgot to take photos during the installation of the internals. new items are: New camshaft, crankshaft, all new bearings, cylinder sleeves, pistons, water pump, rings and one new con rod. Inspected the oil pump and all looked good and to spec. the head was sent to the shop to check checked out and tuned up. I had issues with the new cam bearings during install, they ended up being slightly too small. I had to send it to the shop so they could line bore the bearings. now with some paint