Jump to content

Brent1086

Members
  • Content Count

    157
  • Joined

  • Last visited

Posts posted by Brent1086

  1. 26' hydraulic dovetail gooseneck trailer. This is my middle sons ffa ag mechanics project for this year. I dont know how much he will get to show it. 9k axles, 17.5" tires, pierced frame. He built hydraulic jacks for it. Still waiting on the pin striper. 1206 inspired paint job. Thanks for looking. 

    20210114_163541.jpg

    20210114_163604.jpg

    20201206_122723.jpg

    • Like 11
    • Thanks 1
  2. On the passenger side of the baler on the pulley that runs the twine tie system. The cog/lever sometimes gets to where it is not catching and will do your describing. I dont remember exactly how to fix but remember using washers to get it to catch. I am looking for parts pictures now

  3. That was original or close to it color. Rims were body color with white pin stripes. There is a pin stripe that needs to be put on around cab. Hub caps were originally painted white with red gmc letters. Dad is deciding on hub caps and tires this week. I want him to put mud grips on the back. This was a Korean War era truck is why there was so little chrome on it.I want to take it in the county stock show rodeo parade. Pic is dated 1964 note ffa sticker...it is still on it.

    20200502_113535.jpg

    • Like 1
  4. My grandfather bought this truck new. My dad drove it in high school. It was parked in the barn in the late 60s until my grandfather passed in 2009. I took it to my dads and he started working on it. My sons and I painted and rewired it and finished a few things for him. He has the hub caps and is waiting on the tires.

    20200329_122712.jpg

    20200329_122717.jpg

    20200409_141114.jpg

    20200411_140033.jpg

    20200412_180927.jpg

    20200427_170734.jpg

    20200501_161552.jpg

    20200501_161439.jpg

    20200501_141507.jpg

    20200429_163451.jpg

    • Like 15
  5. Yes, we have a material breakdown. Since it was for show we used all new components. We have around $6k in the trailer. There are some built in Mexico that are very little more than our material cost.  I wouldn't mind using one of them but don't know how long I would want to own it

  6. I do have a video on my phone, not sure if/how to post that. We hauled 10 or so loads before we finished and painted it. We added some rubber bumpers for the cradles to fall against and springs to reset the cradles after dumping. 

  7.  Thanks for all the words of praise/encouragement. This is a ffa project for ffa ag mechanic shows at stock shows. He is at fort worth this weekend. He chose the round bale trailer, with my approval. Since I sponsored/paid for. The plans were the thing that he struggled the most with. We looked at several round bale trailers and then started building. I have built trailers, barns and plenty of stuff. I never learned how to draw. I always built it out of my head. Right or wrong that is how this trailer was built also. He didn't draw the plans until it was done. Small sample of welding  3x4 3/8 wall tubing Thanks again.

     

     

    20191105_171916.jpg

    • Like 3
  8. This is my middle son's ag mech project for this year. I handle around 3k round bales a year. This should help speed up the process. 12 4x5 bales, hydraulic latches. 184 hours of his time. Super proud of him. Thanks for looking 

    20200115_114002.jpg

    20200115_194351.jpg

    20200104_165221.jpg

    • Like 16
×
×
  • Create New...