Jump to content

DirtBoyz07

Members
  • Posts

    6,360
  • Joined

  • Last visited

  • Days Won

    13

Everything posted by DirtBoyz07

  1. Nice fund Blaine , that’s great your saving the old girl 👍 Danny
  2. That’s really Cool Billy 👍😎 Danny
  3. Case IH tech has it for you 👍 here are some picture’s out of the service manual . ‘Danny
  4. Sorry I forgot to look at the service book today , I will do it first thing in the morning and put pictures out here . Danny
  5. These are really tough , I would have to get the details out of the service manual . Those rings have to slid over the other and you need to tighten it up even , I would tell you to get a dial indicator and start pulling it up and keep checking as it gets tighter and keeping it perfectly straight is your main goal . Danny
  6. Pete I have one of those Jib cranes in shop one , use it all the time , that’s why there are two more going in 👍 Those are slats out of a cattle barn , they where in the room we just finished and I moved them outside . Danny
  7. Thanks you guys , the picture of the shop where from last fall , we have been in here now for about one year I just haven’t had time to get the hoists built . I stay working up in the first shop and my son Alex started his own repair business and I let him mainly work in the new shop . The shop is now 44ft wide by 96ft long all heated and air conditioned , I built the building 21 years ago and it’s been a work in progress to get it this way . Danny
  8. I finally took time today to paint our two new jib cranes that I am putting in our new addition of the shop. I finished the last 38 ft of the main shop that was cold storage last fall and my good friend come up from my home town and we built these a few weeks ago . They will get welded to big steel plates that are 1 1/4” thick 4 ft square and the frames go 7 ft in the ground in a 3 ft hole . These hoists are probably over kill but they can never be to safe when it comes to this stuff . We work on some big stuff and the last thing is I don’t want anyone getting hurt
  9. You won’t go wrong with either machine , I would tell you to go with the place that has the best service and close to you 👍 Danny
  10. Keep in mind synthetic oil won’t leave an oil film on anything above oil level and it will rust .I would just run straight 80-90 👍 Danny
  11. Wow , nice time capsule there , still has the pipe strapped to the side frame 👍😎 Danny
  12. It will be just fine , I have been putting it in them for years , it won’t hurt a thing . Danny
  13. Happy Birthday guys , enjoy your day 😊😊 Danny
  14. You would be sick if you guys seen the stuff going to the junk yard out there 😞 anything not T4 compliant is going off the road or out of the field . When it hits the salvage yard they take the cutting torch and cut a hole in the side of the he block 😳😳 Danny
  15. I just finished the last end of my main shop last fall and and it is 42x38 x16 sidewalls and heat it with a 50 gallon LP hot water heater . I have two tube heaters up in the rest of the shop and they work really well but that hot water heat in the floor is they way to go 👍 Danny
  16. I put Carlisle 14 ply trailer tires on my gooseneck and I’m thinking they are 235/85/16 . My good friend has been running them for several years and they still look like new and that trailer is on the road a lot delivering machinery . Danny
  17. I had trouble with one and I had to hand file the top of the tank where the sending unit sits . Not sure why it does that if it’s from over tightening the sending unit and it pulls the metal inserts out of the plastic . ‘Danny
  18. If you hot water power wash it , then use scotch bright and scuff the entire surface and you can use a hot rod clear coat . You can mix it for what ever finish you want, flat , semi gloss, gloss . If you want to rerust the steel you can mix hydrogen peroxide and white vinegar 50/50 and spray it on the metal where it’s back down to the steel and it will rust it in a few seconds . We did my Pro Farm pulling tractor and it turned out great so I also did my shop truck Browny too . Danny
  19. Remove the line coming from turbo waste gate to the injection pump and install a plug where that line hooks into the pump . Your waste gate diaphragm is leaking . Don’t go buying a turbo. Your injection pump won’t go to full fuel because it’s leaking turbo boost at the diaphragm and this is what’s causing the low power . If you need to sent me a Pm ‘Danny
  20. Nice pass 👍 are you guys Pro Farm /466 cu inch , 3x3 turbo , 20.8 tires ? Danny
  21. Very cool Billy , thanks for doing this 👍😎 Kristin will be wanting that 1206 wheat land with the auger mounted on it . I like the old barns 👍 Danny
  22. I think it’s Elmer’s Auto museum correct ? Unbelievable cool stuff in his collection , very sad to see it go but this is how it goes . ‘Danny
  23. I tried two of the 6.0 Hunter Biden batteries , don’t waist your money , the one lasted about 3 charges the other one is still working but only lasts about 1/2 or less of the Milwaukee Danny
  24. I see it had the old farmer sleet plate welded to the cast front pivot so the pin won’t fall out 😳
  25. Call Mapel Hunter Decals and she will fix you up . ‘Danny
×
×
  • Create New...