Jump to content


  • Posts

  • Joined

  • Last visited

Posts posted by turbo10

  1. need to replace clutch and brake pedal shaft.  after i drain the oil and remove the pedals does that shaft just slide out or do i need to remove top cover and remove or loosen other parts TIA

  2. On 5/29/2021 at 4:15 PM, snoshoe said:

    Being black not grey. I would think problem is more likely a head gasket. Compression to water leak any way. Pressure testing removed cooler is not hard. Make two flat plates to bolt over oil ports. Drill and tap one for air coupler. Put in five gallon bucket of water with air applied. Water ports up. No bubbles. No leak. Would certainly do that before putting on another cooler and still having same problem.

    not always that easy worked in a shop customer brought in tractor same deal pulled cooler off tested good so did head gasket.  couple weeks later tractor came back oil in water what the heck so did the head gasket again thinking maybe the guy didn't do it right couple weeks later came back again ok test cooler tested fine again then some one came up with the idea use hot water or heated up the cooler can't member but the hot air or water was enough to open a crack in the cooler......needless to say it was a cooler the whole time this was at a red dealer and an experienced mechanic

  • Create New...