• Content count

  • Joined

  • Last visited

Everything posted by 806JR

  1. Life in Alaska

    AK, I've got a really nice factory IH wide front from a 560 that's for sale. It has the aftermarket short turn steering arms on it. $650 but shipping would probably be a killer from central Minnesota.
  2. 806

    I don't know who the guy is, but the 806 with the 86 series cab is from here in Minnesota. He also put one on a 560. I seen both of them at the Red Power Roundup in Albert Lea, he did a very nice job on them. I don't if Dirtboyz would know who the guy is, seems to me the guy might have been from down in that area.
  3. Road trip to Minneapolis.

    When you went threw Alexandria you were only 20 miles north of my place. The picture of the barn up close, that barn use to have a straight up and down hay loader on the front of it for small square bales. It looked like a hay conveyor but instead of a chain it had 2 augers, 1 on each side that lifted the bales straight up to the big door. When do you head back home?
  4. combine pump on tractor

    Like R Pope said the governor will more than likely not work to well. We put a DT 436 out of a 1480 in our 4386 and tried useing the combine pump. It just fell on its face the minute it started to pull down. If your only going to use it for a yard tractor or for light loads it would do ok but not in heavy loads.
  5. Stuff from old ihc dealership

    Same here Art, there's and old dealership 30 miles west of here that the old guy just locked the doors and left everything. He's still around but I have been told he's an ornery old coot and won't sell any of it.
  6. dairy herd sales

    Brother in law quit milking last summer before he got in to deep. He took it pretty hard but I talked to him today and he said he's sure glad he got out when he did. He was at the local sale barn last week and they had some top notch close up springers there and only got $450 a piece for them. It is definitely a sad state in the dairy industry and doesn't look like it's going to get better any time soon.
  7. Machinery Jockeys

    Around here the major dealers won't give you anything for your trade in's or won't even trade it in,so guys either sell it to a jockey or put it on a consignment sale. So you can find some nice equipment on jockey lots around here.
  8. 15.5 or 14.9s on a M

    I have an M that I used to tractor pull with that had 15.5's on it and I would usually be in the middle to lower end of the class. I put 14.9 Titans on it and first pull out got 2nd and continued to bring home quite a few trophies with it. For me the 15.5's would always spin out where as the 14.9's would dig down and hook up and go. Never been a fan of 15.5's since then.
  9. Terrible day! Pictures!

    Lol, I'm in the club that gave that H away! That's my uncle that delivered the tractor. We are giving a Super A away next year so maybe you can win that Old Tanker!
  10. starting my battle with algae

    660 driver, that's just the nature of the beast with those pumps on the 400 series engines. They all rattle to some point, some louder than others.
  11. Anyone going to LeSuer MN show

    Shoot, wish I seen this before the show Nate. We came down for the show and ended up buying some stuff on the sale so had to come back Saturday with a trailer! I remember seeing a guy with a Herrs shirt on, wish I new it was you would have said hi.
  12. Remember the Heald Haulers?

    Buddy of mine has 2 of them he still uses.
  13. 806 RD pump leaks

    Hey guys, we brought home a 65' 806 with the RD pump on it. It is leaking from around the throttle shaft and from around a spring loaded screw under the rear of the pump. Does anybody know if these are seals or o rings and if we can fix them from the outside or does the pump need to be opened up? Thanks for any info, DuWayne
  14. 806 RD pump leaks

    Ok, thanks guys. I think we will try the rope trick for now and then I can tear into it this winter
  15. W 9 international

    The fuel pump was removed on the w9 we have when we got it and we have never had an issue with it starving for fuel. I've moldboard plowed with it in some pretty hard ground and had no issues.
  16. 1468 at Biewers tractor salvage

    I would doubt that 1468 is going to get tore down. They usually have around 75 tractors for resale. It also might be sold already, you can tell them what your looking for and they will find it for you. If anybody wants to see some of their stuff they're website is www.salvagetractors.com
  17. Lesuer MN swap meet

    Yep, been here since Monday in line to get a vendor spot. If anybody wants to say hi we should be in the short rows on the south end with a red 4 door Chevy dually and triple axle flatbed gooseneck selling used IH parts, just ask for DuWayne.
  18. Tractor model duplicates

    Between Dad, brother, brother in law and I we have 4-1466's,7-806's, 4-560's and 2-M's.
  19. Pic of brothers new 1206

    Seen that yesterday when we walked threw the toy show. Was very impressed with it. That guy does an awesome job on the things he makes.
  20. 4386 steering

    Hey guys, we bought a 4386 with a bad motor a couple years ago and finally got it running this week. When we drove it out of the shop the steering is very choppy like it has air in it, the oil is full and we changed the filter . I drove it around for about 15 minutes and it didn't get any better. Is there any ideas what might be going on or if there is a way to bleed the air out? Thanks for any ideas.
  21. Custom harvesting what is you opinion

    Have known the Johnson's for years, damn good guys to work for! They treat their help very good.
  22. Current fair price?

    The weights would bring $100 bucks a piece and the bracket $100-$125 around here and I'm only about 60 miles south of you old tanker.
  23. 440 baler

    I was thinking that after I seen what you posted. I'll have to see if you can still get the parts from CaseIh or fab up some myself.
  24. Cold starts. Carbureted still beat EFI!

    Heck my '94 Chevy K1500 with 355,000 miles on the original engine fired up just fine this morning at -15f.