IH enthusiast

He's got great content he has made a big influence on me with tractors and equipment.

I think I found the spindle for it so I will order it soon.

Ours have never had a problem they seem to be built good for big hills and washouts.

I have a toy backhoe that I got on an online auction but it's missing a front wheel and I am not sure how you put a new wheel back on. So could anybody help me on this? From the pictures it appears the whole spindle is broken so if anyone could help me find one I would appreciate it.

What do you guys think IH would look like today if it never merged with Case back in 85?

I'm not even sure where there is a pump shop at but I'm sure we could find one somewhere. If this matters to the injection pump stuff I know I rolled one of the seals putting them on.

How much time are we talking? Do I have enough time till winter or just first cutting alfalfa and sweet corn planting. Also it sat for about 7-8 years before I got it last January in running condition.

On my Farmall 706 d301 I was getting diesel into the oil so I replaced the seals between the pump and the timing cover and I ran it for about 30 minutes oil was low cause I did an oil change so I filled it the it ran for about 15-20 minutes and the oil was 3/4 of the way up the dip stick. Does anybody know what could have caused this?

I just use water on a Q tip

🙏🙏🙏

I had one blow up at one year, sounded like a bomb went off.

outside it doesn't look terrible but the insides been flushed about 300 times trying to get crap out but it still has some floaties in it.

If I remember correctly it was cylinder #2, Just a couple years ago I bought the thing and got it running a few months later and it always done it, if its a quicker fix I'd like to get it done before first cutting of alfalfa and hay season but its got a lot wrong with it including burning about as much oil as gas but that's a late summer or winter project for next year. The heating has seemed to get better though. Since its been all gone through because of sitting I went through the carburetor but the tank could have had something that made its way to the carburetor.

On my M I was wondering if anybody would know if my M has a bad valve only it only fires on 3 of the cylinders and under higher load it overheats any help would be appreciated.

Them are pretty cool

BKTs are pretty good tires

sweet

Looks pretty nice the way it is.

Them are pretty sweet

looks great

That thing looks great

Is it common for a serial number tag to be swapped? It was so random I was trying to figure out my m s birthday so I took a look at the castings and not one of them matched.