Jump to content

Brian S

Members
  • Posts

    36
  • Joined

  • Last visited

Posts posted by Brian S

  1. Update for you guys following along. 
     

    I pulled the hydraulic pump to run a couple of wires down these passages tonight. And I think we have solved what the second one does. See the attached pics. 
     

    When I pulled the pump and mounting plate out, the gasket tore blocking the second hole. Didn’t bother picking at it. It had an oring over the hole in the mouthing plate as well. That piece of gasket was blocking this second passage. That tells me this passage isn’t used, or at least not used at some point when they made the updates. So with that being said, any newer revision part number should in theory work just fine. 
     

    This still doesn’t tell us why it was put into the casting to start with. I didn’t go tracing it thru the top cover once I seen the gasket had the flow blocked off. 

    F3EC7BC8-5027-4F93-8A93-97D8A105EBD7.jpeg

    D876B81E-C771-425A-A4C8-F0B4BB6CA429.jpeg

    F4EDEF62-DD3B-4048-9BA7-CE0CB3481461.jpeg

  2. Well, I might just try running some wires or air thru it. I’m still curious to the whole thing. I don’t know that I can give much info in the top cover since it’s still all assembled but the rear casting should be easy to figure out when I gut it. For what it’s worth, the serial number on this tractor is 4218, which makes it a late 63 model. I’ll have the check the casting number on our other 806 and see if it’s the same being a 64 model. As I said before, it’s stumped a lot of folks, peaked a lot of their interest, but no solid answers. 

  3. Good evening gentlemen,

     

    It’s been a while since I posted anything but I come across a stumper today. I got an 806 in the shop that needs the rear house replaced, cast is broke….long story.
     

    Anyhow I’ve been on a search for parts the last few days and have run across a couple different cast/part numbers. Mine is a 380361R1. I located what we thought was a replacement over at Anderson Tractor in Bluffton, Ohio. When we loaded it up, I noticed theirs was a tad different than mine. Their number is 380361R2. Mine has two green o ring ports right behind where your left foot would be and theirs only has one. We were unable to locate one in the yard that had the two ports like mine. To top that off, the old techs at our local dealer said haven’t seen one in all their years with two orings like mine come thru their shop. I’ll attach some pictures. When did they switch to one port and why? 
     

    Now to add to the questions, my top cover also has the two ports. I assume they changed that to one port along the way as well. What does this second port do? Are these pieces interchangeable at all? 
     

    This has baffled a lot of people that I’ve talked to. Like I said, the guys at Anderson’s were super helpful but hadn’t seen it before and the techs at Burkharts were stumped as well. I’ve located one from Gene’s Recycling in Attica so I think I’m good on parts now. I’m really just posting this question out of curiosity sake at this point. 
     

    I know you guys have alot of knowledge, I figured this might be a good place ask. 
     

    Thanks, Brian 

    3461D5D5-D6F7-4C1C-BFD1-C0D38893291E.jpeg

    863C1379-BE10-4D2E-9104-FBE66373FBC0.jpeg

    5E84F63B-6A45-478C-A81A-3A912BC92198.jpeg

  4. 16 hours ago, Jeff-C-IL said:

    You should also be able to work on all the shift linkages thru the top, if you can remove the platform.   The only reason to double split everything is if the TA or gears themselves are bad.   The only special tools needed are the stands, everything is easily done using basic hand tools.  Grew up working on dad's 1066.... never had more that 3/8 & 1/2" socket sets & straight wrenches.  We used the roof trusses in the shop (reinforced) to raise the cab with a come along--not sure why we never killed ourselves or pulled in the shed roof....

    I had to chuckle at that last bit. I thought the same thing when we took the cab on and off the 806 for the TA job this past winter, but we survived. lol

×
×
  • Create New...