Jump to content

sugarmaker

Members
  • Posts

    1,189
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by sugarmaker

  1. Just touching base, good to see some familiar names!

    The truck project: Well I have hundreds of pictures. It is up and running and driving. About like I do everything else in life: half way and having fun!

    Last night:

    7s5ca04.jpg

     

    Great grandsons in the truck;

    zTTik8z.jpg

     

    hN5moed.jpg

    Regards,

     Chris

     

    • Like 5
  2. Mogulman,

    Your work and skill level and attention to detail is amazing. Now understanding your roots in a museum it makes good sense. I don't check in here much sine my TD6 went down the road. But this was well worth stopping in to see your progress!

     Its going to be a awesome T6 for sure!

    Regards,

     Chris

    • Thanks 1
  3. Red power guys,

     I am still here! Dont check in much as I am over on another forum working on the 32 Dump truck project. (Ford Barn) in the 32 to 53 section. 

    Anyway the IH TD6 still is around I was leaning on it yesterday !

    Hope things are good.

     Cant remember how to load pictures on here I believe it changed??

     

    Also getting the shop ready for winter.

    Regards,

     Chris

  4. Folks,

     The TD6 has a new life.

    MGyMlyY.jpg

    I tell Matt he should play the lotto. He advertised for TD6 fenders on a Facebook IH site and had them within 24 hours. A little rough but functional. He and his dad did a nice job building seat frame and new seat and back for the little dozer.

    Matt has plowed several times with the TD6 pulling the John Deere trip plows. He even let me plow with it! It sems real happy to have the loader off its back too:

    NGy62kJ.jpg

     

    I told him since its a farm tractor now he should move the lights down to the side of the grill. He didnt bite.

    Regards,

     Chris

    • Like 2
  5. Folks,

     Me and the TD6. My uncle would be happy that the machine was not scrapped years ago. I had a lot of fun working on it the past 8 years. It has a new home and a new lease on life. Matt is threatening to put a much fresher undercarriage under it. Saving the rear sprockets which are pretty good.

    Will be a nice machine for playing now.

    r1Wd4WW.jpg

    Regards,

     Chris

    • Like 2
  6. Folks,

     Matt invited me to help remove the grill guard on the TD6.

    Here are the remains of the loader system:

    g7frZlP.jpg

    BQREqh5.jpg

    Matt on the TD6:

    qDzie4I.jpg

    9vVAVsk.jpg

    Up on some blocks:

    exZ3uTG.jpg

    The flying grill guard. I think he is going to hang on to this if he ever would get a blade for the machine.

    avvdTYU.jpg

    The new look: The old girl seemed relieved to have the loader weight removed! I drove it around some and it moves and turns much easier without the extra weight too!

    azc95Rd.jpg

    4INCmy5.jpg

    Z9Al4QF.jpg

    I told him he can move the lights down to the side of the grill now that its a farm tractor again!

    Regards,

     Chris

     

     

    • Like 3
  7. Folks,

     I talked to Matt and he has converted the TD6 back towards just a crawler, He has removed the loader and most of the frame work. I am trying to talk him into removing the clunky grill guard also. The grill is pretty good on this machine and should show nice. That was one of the things I had considered doing to the TD6 too. It will make a nice show tractor that can do some pulling work too. He is considering plowing with it. 

    He will need a set of fenders and some other items. The loader frame may be for sale?

    I may be able to get some pictures download that he sent me?

    cEZH2Tw.jpg

    MXsmWeY.jpg

    Regards,

     Chris

    • Like 2
  8. Folks,

    Thanks to all the folks that helped me along the way with the TD6. Matt picked up the loader a week ago. Maybe he will post some pictures?

    Hope things are good in Red Land. 

     I will try to check in once in a while as I still have some IH units (Cub Cadets).

     Regards,

     Chris

    • Like 1
  9. TN,

     Folks,

    Yes I think this machine would have went for scrap or be still setting in the shed at my uncles old place. With the help of a lot of folks on here and brute strength and stubbornness we got it back to functioning unit. Its going to a good home near by so I can go run it if I need to.

    Thanks for the positive comments on the shop too. I have been working on a forklift even though its pretty cold in there it's out of the wind!

    Regards,

     Chris

  10. Hardtail, Dav, Folks,

    Yes the back is almost as good as new, that was Thanksgiving 2017. Adding some things in the shop to allow for some lifting. Jib crane with electric hoist and a F40 (Allis-Chalmers) fork lift. Working on the fork lift is just as challenging as the TD6!

    Found this in the wilds of Albion. Drug it home. Am switching it over to pump gas. Money pit just like the TD6. So its my newest project.

    b5Bez3S.jpg

    ZsfWnIQ.jpg

    Currently having a shop rebuild the tilt cylinders. Drained and replenished the coolant today. Fighting some nuts and bolts but most of the machine has a typical 1/2 inch of grease and dirt as a protective coating!

    The jib crane:

    Only a 8 foot hook height but better than anything I had. 12 foot boom swings 180 degrees. 2 ton Dayton electric hoist.

    6lgc6bY.jpg

    Humm not sure why my pictures are not showing up?

    whEPxyu.jpg

    Yea Matt knows about the Red Power forum. Will see if he can post some things too. 

    Regards,

     Chris

     

    • Like 1
  11. Folks,

     I am in the process of selling the TD6. Yes its going to a friend Matt who is in some of the pictures. He has a lot of IH equipment so it will have a good home and not far away. 

    I really appreciate all the help I received here on Red Power Forum concerning this old loader! I learned a lot and had a lot of fun and one back surgery from working on this machine too!

    Regards,

    Chris

     

     

    • Sad 1
  12. Mogulman,

    Wow! You are all the way in on this 6! Nice work on the machine! It really looks pretty darn good before you started taking it apart! Not sure I have it in me to take one apart that far. But they sure are cute as a button with no extra blades or buckets on them!

    Thanks for posting all the great pictures too!

     Merry Christmas!

    Regards,

     Chris

  13. Dan,

     Great story about the rescue of this machine! Love the pictures and the thought that nuts and bolts are still removable. We have instant lock tite weather here. infact Locktite should look into using water, salt and drastic temperatur changes in their products to secure fasteners Sure works here in NW PA.

     Looking forward to your adventures. One thing you have is large equipment to work on large equipment. A huge plus!

    Regards,

     Chris

    • Like 1
  14. Rawleigh,

     That is a great Idea! Thanks for the suggestion on the inline gage.

    Found the TD6 today. Yep hose going to the left lift cylinder has a hole. Not going to be easy to remove. Need to drain and pull the hydraulic reservoir. Havent done that before so a new adventure. Also the lift cylinder may need to be disconnected at the back to allow the cylinder body to move forward to allow access to the bad hydraulic hose connection .

    XO0txzF.jpg

     

    zz8IdEH.jpg

     

    byOwNTW.jpg

    It started right up on gas and moved over to diesel easily. Tested steering clutches. All good.

    Regards,

     Chris

    • Like 1
  15. Folks,

     Ok I just glanced at the views for this thread: 62.5k  views ??? Really? Folks must be using it to fall asleep at night or something ??

    I think I may go look at the old TD6 and try to cipher out this leaky hydraulic line issue. I dread that because I am sure it will not be a easy, or fun project! We need some picture of it anyway. And I need to bring my Allis D17 home too.

    Hope things are good in Red land!

    Regards,

     Chris

×
×
  • Create New...