Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 05/05/2019 in all areas

  1. A farmer named Clyde had a tractor accident. In court, the trucking company's fancy hot shot lawyer, was questioning Clyde. "Didn't you say, at the scene of the accident, 'I'm fine,'?" asked the lawyer. Clyde responded, "Well, I'll tell you what happened. I had just loaded my favorite cow, Bessie, into the..." "I didn't ask for any details", the lawyer interrupted. "Just answer the question, ...please. Did you, or did you not say, at the scene of the accident, 'I'm fine!'?" Clyde said, "Well, I had just got Bessie into the trailer behind the tractor and I was driving d
    6 points
  2. The little Ford dump truck is a one owner truck.
    6 points
  3. 5 points
  4. I can remember that movie when it was new and watching it with Grandpa. The best part is where the ramcharger comes out of the dirt.
    5 points
  5. Bought a set of IH 5 spoke dual rims few years ago at a farm sale. Had a set of worn out 18.4x38 mounted. Dismounted the tires but found out they are 38x14 and not 38x16 like i hoped. Rims are in good shape few dings. Thinking of buying some flat base 38x16 rims and welding the IH wheel center to the blank rim. I can deep dish them that way as well.
    4 points
  6. We made it out to Earlville, Iowa to the truck and tractor show. It was a great show. Just shy of 40 tractors. Took pictures of most of them. And I'm guessing around 150 trucks. Took pictures of most of the older stuff. Only one Transtar 4200 in the bunch. And if you remember from a previous post I said we were going as spectators this year. Next year we will be participating, no doubt about that. Hope you enjoy the show. One thing I will mention, the yellow W6 with the loader is a diesel. And the last pictures are of my new t-shirts.
    4 points
  7. Saw this old girl stopped after working a field near leslie michigan the other day. I always liked the way these looked. Even had a 3 point!! Chris
    4 points
  8. I've found pieces of chains, discs, pto parts, long list. Actually look forward to see what will be next. I once rented a farm that had been owned by a guy that raised beef cows and fed round bales of hay. There is not much that can be worse than plastic round baler twine plugging up your field cultivator. Cuss, Cuss, Swear, Swear double.
    4 points
  9. Isn’t your number 1-900-Mixalot?! 🤣
    4 points
  10. 4 points
  11. It's nice seeing pics of ih tractors, but its awesome seeing em out in the field, let's post pics of your old rigs working, as soon as the fields are dry I will, for now here is a pic of me on the 1456 before it was mine and I was just dreaming of owning it
    3 points
  12. The Police have found a large number of dead crows on thhe A1081 just outside Harpenden early this morning, and there was concern that they may have died from Avian Flu. A Pathologist examined the remains of all the crows, and, to everyone's relief, confirmed the problem was NOT Avian Flu. The cause of death appeared to be from vehicular impacts. However, during analysis it was noted that varying colours of paints appeared on the bird's beaks and claws. By analysing these paint residues it was found that 98% of the crows had been killed by impact with motorbikes, while only 2% were kill
    3 points
  13. If you come up here to North Dakota on the sandy flat plains you will find arrow or spear heads.a friend of mine used to find them about 5 miles from our farm. He found a lot I think around a 1000 now. Brother found this about 30 miles away on land we used to farm. Real hilly about mile from the mouse or souris River here in North dakotaDakota. You still see Indian burial mounds out in some pastures here
    3 points
  14. 1952 and 1945 H Farmalls , dad bought new.
    3 points
  15. Isn't lorenzo a bit old (pic of lorenzo attached below) to know who Mix-a-lot is Haha 😁😂🤣
    3 points
  16. Whoever edits these is great I laugh thill I hurt Everytime I watch these the little kid one is great also
    3 points
  17. Well.... Since the subject has changed from other stuff of some kind to long handled hammers, I'll post a few or ours. But I have no ball pein hammers with a four foot pipe handle, so sledge hammers are going to have to do. This 16 pound sledge was my blacksmith dad's. I saw him make a lot of swings with it as a youngster. I even remember a time or two when I was holding something long with one end on the anvil while he hit it. My hands stopped stinging by now. I'm not trying to brag, but I'm am trying to say my dad was one stout old blacksmith. He could grab the very end of the handle w
    3 points
  18. T-shirts. It was buy 3 get the 4th free. Looked around and soon found the four I wanted. Snowman caught my attention first and drew me to the both. Then saw the sign. Movin' On and Rubber Duck made three. Then I noticed POW-MIA. No brainer there.
    3 points
  19. Little mowing today , good day till this happened Took about 15 minutes to cut out I got really lucky.... Really lucky...
    3 points
  20. Wholllly mollly! I better see them high rollers in Skagit for some cash! Got some grass planted. Baled pasture grass for dry cow feed. Tractors are using more power to push peat than bale! The M7-171 is new and the Fendt has 10k hours. Says the fendt will prob out last the Kubota already. Its (kubo) kinda thirsty and can tell its 1st gen of big tractors. Butttt the 0% for 5 years hooked his be claims. Mowed up so they baled row. But should of layed 4' at least. Always forget...they are pretty wet. At least marshmallows are forgiving. Uncle had Brillion hooked up...sad 71
    3 points
  21. Hi guys a while back I posted about finding a disc for my Super M. Well I found one, actually saved it from the scrap yard so it didn’t cost me anything. Its in decent shape. Pretty solid for the most part. It needs a couple discs, which they also had, just never put them on... along with the “clamshell” bearing housing. Does anyone have an online source for parts? I’m likely going to redo each gang 1 at a time...
    2 points
  22. A Harley Biker is riding by the zoo in Washington, DC when he sees a little girl leaning into the lion's cage. Suddenly, the lion grabs her by the collar of her jacket and tries to pull her inside to slaughter her, under the eyes of her screaming parents. The biker jumps off his Harley, runs to the cage and hits the lion square on the nose with a powerful punch. Whimpering from the pain the lion jumps back letting go of the girl, and the biker brings the girl to her terrified parents, who thank him endlessly. A reporter has watched the whole event. The reporter addressing the Harley ri
    2 points
  23. Rusty......going the other way, down under ......trying to beat the autumn......getting some last minute winter feed in .... Mike
    2 points
  24. I also find alot of rocks that have holes in them, some look natural some dont, I really dont know anything about em
    2 points
  25. The first pic is my only find yet this year, other is the best of what me and dad found
    2 points
  26. Not in the field here yet. But since we all like pictures I share some older ones, have shared some of these before.
    2 points
  27. hello , 3 years ago we were round baling hay , bil lost his wallet then, looked a long time for it, this spring turkey hunter finds it and returns it to him, this was after the field had been plowed twice for corn. manure spread on it twice,
    2 points
  28. Not much work done around here yet. First picture is the one 1066 drilling new seeding. We have since put LED on it
    2 points
  29. I run across the usual broken equipment pieces that imagine we all find time to time. On my place it usually gives me a chuckle because my son & I are the 4th &5th generation here. So I usually imagine a bad day for my father, Grandfather or great grandfather accompanied by a good cussing fit when I pull up broken equipment pieces. I of course have added a few broken pieces myself along with the cussing fit as well. Still looking for the 24" Klein spud wrench I left laying on top of the Amco disc 3 years ago. I'm sure I'll find the pointed end in one of my rear tires one day. Then ther
    2 points
  30. Added photo of Farmall C in action with the thrasher , Me on the The”C” 67 years ago
    2 points
  31. Miscellaneous photos that just needed their own post. The dog was the first picture of the day. We knew right then and there it was gonna be a great day. And a hilarious side note. Wife wanted to see how close we could get to a eagle next in Manchester, Iowa. And it's one of those situations you can see it from the main road but it's hard to get there. Saw a guy riding his bicycle so we asked for some directions. He'd lived in that town 40 years and had no clue about the eagle nest. He laughed to. THE END.
    2 points
  32. I heard some comedian say once that her next song should be "Maybe I'm the Problem!" 😁 Al
    2 points
  33. I did find a picture from last year round baking that my step daughter took. I also found a picture of a Ford 8600 toy i redone for a friend of my sisters for a Christmas present. If owner wants , I’ll customize the toy, this one I added all the levers his real one has.
    2 points
  34. Do you 2 ever catch anything bigger than those small bait fish haha 😁🤣
    2 points
  35. You just need to get a half dozen or so of those inexpensive brush hogs you posted about to hang off the front
    2 points
  36. Inexpensive "Zero Turn" for someone with a BIG yard?
    2 points
  37. We always would get fence staples , horse harness evener links or drill packing chain stuck onto the 620 drill discs
    1 point
  38. Saw this from my project mowing today... Old pumps they used to be driven off a water wheel in the river. Replaced at some point. Now abandoned forever as water rights were lost/given up. Older motor This one is 75 hp 3ph. Control panels. Intake sorry I for got the outside picture but just thought it deserved a little recognition. The pipe is 1/8 steel.
    1 point
  39. It plows fine,good in the furrow,stays behind straight,doesn't walk around,all bottoms level. Land wheel set and works fine. It just is very hard turning both ways.It just dosent flow around,front of tractor will skid.I just don't think the tail wheel is going where it should when plow is up out of ground and turning. I unhooked tail wheel greased and spins freely. Front center pin is free and turning but maybe not as easy as it should be I will have to check.I like to know what transport is so maybe that's what it is in. If you get a chance sometime to check your manual I appreciate it. No b
    1 point
  40. I didn't see what it looks like but I wouldnt say that. Farmall hs are stupid cheap these days. Value dropped a ton lately. Chris
    1 point
  41. This thing could pack the hay in . I had to be on my toes to try making tight bales but under 120 lbs . Once baling oats with full grain I started little early trying to finish a field and the bale wagon roadsided 110 bale load and a bale squeeze picked it up and put it on a Bob tail waiting , ran over scale and bales averaged 160lbs trucker, buyer , and my Dad were all ready to kill me if you look at one of pics there is a marker pointer in front run by a cable from bale shoot , my Dad calibrated that pointer and painted a line between 95 & 120 lbs and I was to keep an eye
    1 point
×
×
  • Create New...