Archived

This topic is now archived and is closed to further replies.

Bud W.

International Construction Equipment Brochures

13 posts in this topic

I have several IH construction brochures from the late '60's which I used for a paper on logging procedures and equipment used during the late 1960's. Among these are a brochure on the TD -30, International 75 - 95 HP engines ( power units, both gas and diesel), and a small pocket size brochure showing International full line of construction equipment and attachments. The company that I interviewed at the time, a hometown concern, which my grandfather helped form during the time the country was changing from horse-powered farming to mechanical means, used some internatioinal equipment. The company had a TD-15, several 150 loaders and a red TD-6 along with International trucks. They also used Clark skidders and a Pre-Hauler made by Tree-Farmer, I think, Michigan and Cat rubber-tired loaders.

I will try to post pictures if I can find a scanner to use with my computer. The TD-30 pictures and the full-line catalog bring back fond memories when IH was a major player in the construction market.

Where do you guys get parts for your IH Industrial machines? I would think it would be hard considering Dresser, Komatsu, and now the Polish company that ended up with the crawler line. Are any parts still available from Case-IH?

Share this post


Link to post
Share on other sites

I have several IH construction brochures from the late '60's which I used for a paper on logging procedures and equipment used during the late 1960's. Among these are a brochure on the TD -30

Bud, I would be especially interested in seeing high-resolution scans of the TD-30 crawler brochure in its entirety (as similar to Rocko's postings)

Thanx!

Dressta would be your best source probably for new parts..junkyards best source for used parts.

Share this post


Link to post
Share on other sites

i get mine bits off the IH/Hough/dresser aftermarket suppliers, sorta located a couple of nice tame suppliers who use a pencil to write the bill instead of a salad fork

about the only thing i have got off NSKomatsu was the shim packs on the output shaft for a IH 530 payloader, oddly enough they where same price at either of my suppliers

rocko59 will know what they are

needed a seal kit for the parking brake air cyl

NSKomatsu $320

IHK $42

fairly simple choice wasnt it :D:D

Share this post


Link to post
Share on other sites

Hi Ozfarm That reminds me of a job I did last yr on a 520B loader. A local farmer bought it at Ritchie Bros sale, he said it drove good there, when he got it home he found out it had no 2nd or 3rd . I went & checked it out & the trans pressures were haywire, so I told him it's internal & we'll have to pull it out. He hauled it to the shop & I found that the 2-3 shaft had eaten right into the case where the seal rings are & the bearing at the other end was REALLY haywired, it had the original outer race ground out on one side so a smaller ball bearing fit into it & it had a electrical conduit nut for a spacer etc!!

We have a very large stock of new IH/Dresser parts for most of the crawlers , from TD6 to late TD25's & a fair bit of loader stuff, we can source almost anything needed for the line. Also have a very large stock of used parts too! Check out our website by clicking on my handle & looking in My Profile. We ship parts to quite a few countries. Russ B)

Share this post


Link to post
Share on other sites

Are you guys gonna post any of those brochures or just teese us LOL

thanks Sam

Share this post


Link to post
Share on other sites
Are you guys gonna post any of those brochures or just teese us LOL

thanks Sam

I'm going to try to get the images scanned and printed in this thread. I'm not to good at this computer stuff, but as soon as I can get some helpI will post the TD-30 brochure and parts of the others. BTW in one of the brochures a sideboom on a TD-15 shows a welder chained to a transmission pipe and it mentions a Pay-Welder. Have any of you heard of this item?

Bud W.

Share this post


Link to post
Share on other sites

Hi Bud Looking forward to seeing those brochures, I have seenreferences to Pay Welders in the engine spec manuals, will hafta see what info I can come up with. Russ B)

Share this post


Link to post
Share on other sites

Hey Bud that's great to hear about the info you have. I'm always looking for stuff on the IH tracked loaders from the 50's on up to the 70's and even 80's. If you have lots of pics of 150's, that would be terrific, I would LOVE to see those. If you need any help posting them pics just let us know...thanks.

Share this post


Link to post
Share on other sites

Here´s something from the german crawler front.

post-229-1111093686.jpg

Share this post


Link to post
Share on other sites

Bud W --- I'd sure like to see your TD 30 brochures and the others you have, so I hope you'll get an opportunity to scan 'em.

Matbush --- Thanks for posting your German TD 24!

It's a real pleasure to see all of these International Crawlers and all other IH Construction Machines.

Share this post


Link to post
Share on other sites

Here´s something from the german crawler front.

Hey Matt,

I just learned a new German word today, Raupenschlepper (crawler tractor) LOL

In most of my perusals at the sites having a national domain of .de, I find that "Schlepper" seems to be more in vogue for "tractor" in Germany than the word "Traktor"..is this so?

Thanx for posting photo of my all-time favorite International crawler, the TD-24

Wes

Share this post


Link to post
Share on other sites
Are you guys gonna post any of those brochures or just teese us LOL

thanks Sam

I'm going to try to get the images scanned and printed in this thread. I'm not to good at this computer stuff, but as soon as I can get some helpI will post the TD-30 brochure and parts of the others. BTW in one of the brochures a sideboom on a TD-15 shows a welder chained to a transmission pipe and it mentions a Pay-Welder. Have any of you heard of this item?

Bud W.

Bud, Knew I'd seen someone mention something about pay welders, Heres a document from the IHC "Product Identification Committee" concerning TD-15, TD-20 & pay welders

Share this post


Link to post
Share on other sites